WakeOnLan not working J4205 |
Post Reply |
Author | |
Algiux
Newbie Joined: 24 Jun 2023 Status: Offline Points: 15 |
Post Options
Thanks(0)
Posted: 24 Jun 2023 at 12:51am |
Enable WOL in UEFI, go to boot, boot from lan enable
|
|
Simon90
Newbie Joined: 11 May 2020 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
How can I check if the power supply supports WOL ?
|
|
Simon90
Newbie Joined: 11 May 2020 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Hardware: [URL=https://www.asrock.com/mb/Intel/J4205-ITX/index.us.asp]J4205[/URL]
I tried to get WakeOnLAN startet, but when sending magic packages from my PC or my fritzbox (a router by avm, which can also send magic packages), the PC is still powered off. The configuration seems ok: $ sudo ifconfig enp1s0 enp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.35 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 2003:d1:73c:6800:dc8:cc91:3aa4:9563 prefixlen 64 scopeid 0x0<global> inet6 2003:d1:73c:6800:7285:c2ff:fe85:939f prefixlen 64 scopeid 0x0<global> inet6 fe80::7285:c2ff:fe85:939f prefixlen 64 scopeid 0x20<link> inet6 fe80::3e59:ce76:b7f8:2e02 prefixlen 64 scopeid 0x20<link> inet6 2003:d1:73c:6800:bcd5:ec31:627d:379b prefixlen 64 scopeid 0x0<global> inet6 2003:d1:73c:6800:4299:b7ff:831c:88fe prefixlen 64 scopeid 0x0<global> inet6 2003:d1:73c:6800:259f:6ff7:959a:888b prefixlen 64 scopeid 0x0<global> ether 70:85:c2:85:93:9f txqueuelen 1000 (Ethernet) RX packets 2064 bytes 555524 (542.5 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2204 bytes 781779 (763.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 :~$ sudo ethtool enp1s0 Settings for enp1s0: Supported ports: [ TP AUI BNC MII FIBRE ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Receive-only Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) drv probe ifdown ifup |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |