X99 Extreme6/3.1 128GB memory issues |
Post Reply |
Author | |
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Posted: 19 Dec 2015 at 3:05pm |
I've since read read elsewhere that if you place 4 sticks only, enter the BIOS and set the XMP Profile you want and Save and Exit, rebooting into the BIOS making sure the Profile "stuck' , then shutting down and placing the remaining 4 sticks will get all 8 sticks up-n-running.
Now, with this being the Internet and all that I read that, YMMV :) |
|
agserm
Newbie Joined: 15 Dec 2015 Location: SF Bay Area Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Thanks to both Wardog and Xaltar, your input is much appreciated. I did contact ASRock by phone and at the time I called there was no BIOS available. Amazingly, a new beta bios was released the next day. Going to try it shortly once I can take some downtime on the machine (I did get it up and running on 4x8G DIMMS)
I did eventually find the phone number that Wardog mentioned on the ASRock website but it was not obvious that it was the tech support line. Thanks again for the suggestions.
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 25043 |
Post Options
Thanks(0)
|
Wardog is correct, ASRock has proven very reliable and often go beyond the extra mile to help with compatibility issues. Get in touch with them directly, either by phone or support ticket on the ASRock website and someone will help you work through your issue.
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
Um, on re-reading that line above, somewhere between my gray matter and my KB that thought got discombobulated Give 'em a call and they'll take good care of this, promptly. There. That was more reassuring than my first reply. Sorry for that. < id="kpm_plugin" ="application/x-KPMPlugin">
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
From 1.00 being the release BIOS to revision 1.16 I'd have to say there's more rolled into 1.16 than just the ""Fix CPU OC settings after resuming from S3."" they say is.
Though, even so, 1.16 is dated considering 16GB sticks have only very recently come on the scene in any numbers. My opinion. Call ASRock Tech Support at 1-909-590-8308 during business hours and politely inquire. The worst that can happen is you get from them one or two beta BIOSes via email attachment to test with. < id="kpm_plugin" ="application/x-KPMPlugin">
< id="kpm_plugin" ="application/x-KPMPlugin">
< id="kpm_plugin" ="application/x-KPMPlugin"> Edited by wardog - 15 Dec 2015 at 4:34pm |
|
agserm
Newbie Joined: 15 Dec 2015 Location: SF Bay Area Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Trying to get this board up and running and getting nowhere. It seems that others are reporting issues with similar boards and compatibility with 16GB DIMMs. Does anyone have any experience with this board or knows when a BIOS that improves this situation might come out?
I see there is a beta BIOS version 1.16 available but it doesn't say anything about memory compatibility. Has anyone tried this BIOS with 16GB modules? Using the corsair CMK128GX4M8A2133C13 8x16GB kit. I have also tried some other 16GB DIMMs, and I have tried 1, 2, and 4 modules at a time. All I get is error code b0 on the motherboard. I don't have any smaller modules to test or flash the BIOS with at this point. Thanks for any help.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |