Compatible GSkill RAM flop....

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Those are 2 very different models of RAM kit. It's very common for mixed RAM setups
to not be able to reach their full XMP speed. That said, try installing only the
3200 kit and enabling XMP, then, manually lower the frequency down to 2666 and 
then restart. If it works fine and boots into the OS then shut down and install
the other kit. You can try mixing the kits so the 2800 kit in A1 and A2 then the
3200 kit in B1 and B2. I have found that sometimes lets you get a bit more out of
a mixed setup. 

Edited by Xaltar - 03 Dec 2021 at 6:17pm

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24548	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Topic: Compatible GSkill RAM flop.... Posted: 03 Dec 2021 at 6:16pm
	Those are 2 very different models of RAM kit. It's very common for mixed RAM setups to not be able to reach their full XMP speed. That said, try installing only the 3200 kit and enabling XMP, then, manually lower the frequency down to 2666 and then restart. If it works fine and boots into the OS then shut down and install the other kit. You can try mixing the kits so the 2800 kit in A1 and A2 then the 3200 kit in B1 and B2. I have found that sometimes lets you get a bit more out of a mixed setup. Edited by Xaltar - 03 Dec 2021 at 6:17pm


Walter69 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 03 Dec 2021 Location: Ontario Status: Offline Points: 20	Post Options Post Reply Quote Walter69 Report Post Thanks(0) Quote Reply Posted: 03 Dec 2021 at 2:10pm
	Have 2X8GB Gskill Ripsaw 2800 1.2V (16-16-16-36) in a AB350 Pro 4 for a few years(Ryzen 5). Just grabbed 2X8GB GSkill Ripsaw 3200 1.35V (16-18-18-38) to bump up to 32GB total, and can't manually adjust bios to make them come up above 1800MHZ to say 2666MHZ 1.35V(keeps rebooting to default after a couple tries)? Is the compatibility list really that sensitive and this cause is lost? Thanks for your time and response if helpful!