|
Fresh Windows install with RAID on X399 Taichi |
Post Reply 
|
Page 12> |
| Author | |
millennium69 
Newbie 
Joined: 26 Feb 2023 Status: Offline Points: 60 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Fresh Windows install with RAID on X399 TaichiPosted: 26 Feb 2023 at 9:15pm |
|
This is for Win10 BTW. Win 11 doesnt see the drivers as compatible even though you download them from the Win11 section on the AMD site.
|
|
 |
|
|
millennium69
Newbie
Joined: 26 Feb 2023 Status: Offline Points: 60 |
Post Options
Thanks(0)
Quote Reply
Posted: 26 Feb 2023 at 8:58pm |
|
Spent two days on this.
During the course of trying different things I had to flash the BIOS using the flashback button and port to 3.20. I then used the AMD raid 930_00296 drivers during the Windows hard drive setup screen. I had to load the \WIN10\x64\NVMe_CC\rcbottom and the \WIN10\x64\NVMe_CC\rcraid drivers for the drives to show up in the raid config. Upgrading the BIOS to 3.92 which is the latest as of this post worked, you just have to re-enable raid in the BIOS again. |
|
|
|
|
millennium69
Newbie
Joined: 26 Feb 2023 Status: Offline Points: 60 |
Post Options
Thanks(0)
Quote Reply
Posted: 26 Feb 2023 at 6:11pm |
|
These docs are not for this motherboard. Please advise.
|
|
|
|
|
millennium69
Newbie
Joined: 26 Feb 2023 Status: Offline Points: 60 |
Post Options
Thanks(0)
Quote Reply
Posted: 26 Feb 2023 at 6:10pm |
|
I can confirm the same. Fresh install is not seeing the raid but the drives are showing up separately.
|
|
|
|
|
Csosa3D
Newbie
Joined: 16 Jan 2023 Location: Lithia Florida Status: Offline Points: 35 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Jan 2023 at 10:32am |
|
Were you able to get this fixed? I'm running into the same situation where I'm loading the drivers and Windows is seeing my NVME Raid partition but will not allow me to install on the drive. It's saying it's not a bootable drive.
Asrock Taichi x399 with 1950x running P3.92. |
|
|
|
|
ASRock_TSD
ASRock_Official 
Joined: 20 Mar 2015 Status: Offline Points: 8802 |
Post Options
Thanks(0)
Quote Reply
Posted: 01 Mar 2022 at 5:11pm |
|
Dear ibullard,
Thank you for the posting. Please refer to the RAID Installation Guide from below link to create RAID Array and install the SATA Floppy during Windows installation to try. RAID Installation Guide: https://download.asrock.com/Manual/RAID/X399%20Taichi/English.pdf Thank you, Best wishes, ASRock TSD |
|
|
|
|
ibullard
Newbie
Joined: 10 Feb 2022 Location: Texas Status: Offline Points: 65 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 Feb 2022 at 6:14am |
|
Bump.
|
|
|
|
|
ibullard
Newbie
Joined: 10 Feb 2022 Location: Texas Status: Offline Points: 65 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 Feb 2022 at 8:27am |
|
So, are there any actual ASROCK representatives on this forum or is this just a place where they let users complain and never do anything about it?
|
|
|
|
|
ibullard
Newbie
Joined: 10 Feb 2022 Location: Texas Status: Offline Points: 65 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Feb 2022 at 9:11am |
|
Yes. I verified the BIOS settings for each BIOS install because they reset the settings then verified the RAID array was correctly set up in the RAIDXpert2 BIOS menu. During my first attempt, I even reset the BIOS to the default and then re-set all RAID related NVMe settings, recreated the RAID array in the RAIDXpert2 menu, and tried again.
|
|
|
|
|
kerberos_20
Senior Member 
Joined: 06 Dec 2017 Location: czech republic Status: Offline Points: 3687 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Feb 2022 at 9:01am |
|
you have initialised RAID array on new drives?
Edited by kerberos_20 - 10 Feb 2022 at 9:01am |
|
|
|
|
Post Reply
|
Page 12> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options