Intel Arc A750 Challenger D 8GB OC no OC available

The Answer from Intel, and great that one and the other dont know what to do.

At least, when the Card is under Load, both of them running with 2400MHz Intel and Asrock, so no difference between the Cards and nothing that would speak for Asrock. Less Memory and slower Memory at Asrock, and same Speed vs the Intel Card.



"Thank you for your patience and cooperation. We understand your situation and would like to explain our stance on it. We can guarantee and support for any of the base Arc graphics and make sure the performance is according to our product release specifications. According to the same specifications, our graphics chip has been released to Original Equipment Manufacturers such as Asrock, who can customize and optimize the use of resources and depending on the cooling solution, boost it in some cases in certain setups.
We thank you for your vote of confidence in the Intel Arc Graphics . The way of working as mentioned by Asrock is that under load, is set to run at 2200Mhz. As this is rather unique for the time being, we believe that due to the nature of the settings, it cannot be modified by our base generic driver and should it require further customization, the OEM most probably would release a driver version/Arc Control version of their own to recognize the modifications.
If there are further inquiries on this specific product, our advice would be to reach out to the manufacturer for further support as they hold the solutions according to the modifications to the base card."

Greetings

2400MHz is the Boost frequency, as in when thermals and voltage permit the card
will boost to this figure. The 2200MHz ASRock states is a typical load frequency
which is higher than the reference Intel card.

You need to put the card under load and check GPUz. Then, if under load you don't
see 2200MHz then you should open a support ticket with ASRock. That should not be
the case.

You can put the card under load in GPUz by clicking the "?" icon next to
"Bus Interface: PCIe x16" and starting a render test.

GPUs behave differently under different loads. If you want to check gaming frequency
you need to load the card with a gaming load.

I hope this makes sense and answers your questions.

Edited by Xaltar - 12 Jan 2023 at 3:12am

Dear Darklegion1978,

Thanks for the reply.

Unlike the reference card (stock card), Intel A750 CLD 8GO is specially tuned, so that the GPU clocks are guaranteed to operate at 2200MHz or more when the graphics card is under load.

Intel also has notified us about the values showing on the Intel ARC control.
They will judge whether to change the values when detecting the Intel A750 CLD 8GO.

With thanks,
ASRock TSD

Edited by ASRock_TSD - 10 Jan 2023 at 4:50pm

Good Morning and Thx for your reply.

The thing is, that the Card gets up to 2400 MHz as the original one (Boost Speed), so theres no difference between them.

But the Standard GPU Speed is not the 2200 MHz as you suggest on your Website, its just 2050 MHz, also as the normal Card.

I guess theres anything wrong with the drivers and to detect your Card as an Asrock OC Variant and not an normal A750.

I done some Pictures for you, to see what i mean.



and



I have done the Steps you told me, also had a Conversation with Intel, they also made a Ticket for those Issue.

Greetings Roman

Hello,

i bought the Intel Arc A750 Challenger D 8GB OC Variant.

As you write on the Product Page, it will have 2200 MHz GPU Clock.

The Card has just 2050 MHz as the normal Intel Arc A750.

GPU-Z and the Intel Control Center, both are showing the Speed 2050 MHz and not the 2200 MHz.

So wheres the issue or Problem, are these the Drivers from Intel, or is it your Product that works not correct?

Greetings Roman