x670e taichi ppt edc tdc on manual bug£ |
Post Reply |
Author | |
buttabean
Groupie Joined: 18 Jan 2023 Status: Offline Points: 370 |
Post Options
Thanks(0)
Posted: 09 Mar 2023 at 5:17am |
This has to be a bug. I reset the stuff to auto in the amd cpu sections.
I applied the 85c -30 present and booted to windows. loaded up ryzen master and see the curve applied. I then go to the curve optimizer and set my settings in ryzen master. hit apply and reboot. They don't show as being. I get a 608 in the blender benchmark and it maxes temp limit of 85 https://imgur.com/a/E6xJGP0 I click curve optimizer again and all the setting i set are still there. If I click apply, the home dashboard updates with the correct values without rebooting. with the applied settings i got a 598 in blender with a max temp of 73c so idk what to think |
|
buttabean
Groupie Joined: 18 Jan 2023 Status: Offline Points: 370 |
Post Options
Thanks(0)
|
There seems to be two separate sections in the bios to change these setting. amd precision boot and in smu. trial and error at this point to see if turning one on vs the other works.
|
|
buttabean
Groupie Joined: 18 Jan 2023 Status: Offline Points: 370 |
Post Options
Thanks(0)
|
1.11 gave the same results. I noticed if you set the preset to auto, it will take the all core offset
https://imgur.com/a/1wPDwmE |
|
buttabean
Groupie Joined: 18 Jan 2023 Status: Offline Points: 370 |
Post Options
Thanks(0)
|
https://imgur.com/a/i94zAqo
1.14 with the -30 preset curve shows up but my other settings don't. i guess i'll test a earlier bios and see if it still does this |
|
buttabean
Groupie Joined: 18 Jan 2023 Status: Offline Points: 370 |
Post Options
Thanks(0)
|
i must be doing something wrong because i loaded up bios 1.14 and experiencing the same issue.
|
|
buttabean
Groupie Joined: 18 Jan 2023 Status: Offline Points: 370 |
Post Options
Thanks(0)
|
also just noticed it's not showing the core offset either
|
|
buttabean
Groupie Joined: 18 Jan 2023 Status: Offline Points: 370 |
Post Options
Thanks(0)
|
buttabean
Groupie Joined: 18 Jan 2023 Status: Offline Points: 370 |
Post Options
Thanks(0)
|
I've installed the latest bios 1.18 and I have a 7950x.
Under smu settings, you'll find edc tdp, tdc ppt. I decided to tweak these from auto since i was reaching 95c in blender composites and was causing crashes to occur from insanely quick spikes When I turn off eco mode, it seems to not accept my manual inputs and runs the computer at 500mhz. Does this occur for anyone else? |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |