|
J3455-ITX does not boot |
Post Reply 
|
Page 123> |
| Author | |
ziglog 
Newbie 
Joined: 22 May 2021 Location: istanbul Status: Offline Points: 75 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: J3455-ITX does not bootPosted: 31 May 2021 at 9:51am |
|
|
 |
|
|
ziglog
Newbie
Joined: 22 May 2021 Location: istanbul Status: Offline Points: 75 |
Post Options
Thanks(0)
Quote Reply
Posted: 31 May 2021 at 9:49am |
|
how i make simple voltage shifter from 3.3V to 1.8V?
|
|
|
|
|
x893
Newbie
Joined: 16 Oct 2017 Status: Offline Points: 21 |
Post Options
Thanks(0)
Quote Reply
Posted: 30 May 2021 at 2:52am |
|
Hi,
i resolve this issue with next steps: 1. order IS25WP064A-JBLE 2. make simple voltage shifter from 3.3V to 1.8V 3. program previous flash image 4. desoldering onboard flash and soldering new flash. Good luck |
|
|
|
|
ziglog
Newbie
Joined: 22 May 2021 Location: istanbul Status: Offline Points: 75 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 May 2021 at 1:30pm |
|
@sndlnk
I have a same problem with the same motherboard, i bought it 3 years ago and i didn't put out it from its box, so i didn't check it until now, because, from 1994, i set up over 100 times, the desktop computers; i hasn't been coincided an insoluble motherboards problem like this, until now . How did you solve this problem at the end? |
|
|
|
|
ziglog
Newbie
Joined: 22 May 2021 Location: istanbul Status: Offline Points: 75 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 May 2021 at 1:25pm |
|
|
|
|
|
ziglog
Newbie
Joined: 22 May 2021 Location: istanbul Status: Offline Points: 75 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 May 2021 at 12:43pm |
|
I have a same problem with the same motherboard, how did you solve this problem at the end?
|
|
|
|
|
skipx
Newbie
Joined: 06 Sep 2019 Status: Offline Points: 1 |
Post Options
Thanks(0)
Quote Reply
Posted: 06 Sep 2019 at 4:59pm |
|
I bought two J3455-ITX boards. Both started out with problems. One just came back from repair and one has been send to repair. Maybe production problems? Hopefully the repaired one doesn't get in problems again..
|
|
|
|
|
x893
Newbie
Joined: 16 Oct 2017 Status: Offline Points: 21 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Feb 2019 at 3:54am |
|
Hi,
i resolve this issue with next steps: 1. order IS25WP064A-JBLE 2. make simple voltage shifter from 3.3V to 1.8V 3. program previous flash image 4. desoldering onboard flash and soldering new flash. Good luck 
|
|
|
|
|
jmoondog
Newbie
Joined: 21 Feb 2019 Location: finleyville Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Feb 2019 at 3:50am |
|
think I found my problem I have been using 1066 ram not 1600 ram. I just noticed.. grr will get back if that is it.
|
|
|
|
|
jmoondog
Newbie
Joined: 21 Feb 2019 Location: finleyville Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Feb 2019 at 3:28am |
|
I have the same problem I have used 3 different power supply, that all work on other systems, 2 different rams (2 different sets of 4g 1066) I have used one stick and both stick in either slot. Tried running through the vga slot or the hdmi slot. I have tried running with simple hookups and full hookups, sdd, and hdd drives, and even no hard drives. I cant even get a bios beep, just black screens. As far as I can tell there is no motherboard led. I even bought a second motherboard thinking the first one was doa, and the same situation there.
I was looking for a simple pop some memory in, and it would work setup. I know I am missing something simple but am at a loss. |
|
|
|
|
Post Reply
|
Page 123> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
ziglog wrote: