Fatal1ty X370 No USB in Bios |
Post Reply |
Author | |
twf85
Newbie Joined: 08 Mar 2017 Location: Tucson, AZ Status: Offline Points: 144 |
Post Options
Thanks(0)
Posted: 13 Mar 2017 at 4:47am |
As
First though, if you're trying to boot a W10 flash drive, you are most likely booting into a UEFI installer. Goto the Boot tab, and at the bottom, there is an option for "CSM Compatibility". It's Enabled by default, so disable that. After you've confirmed that you are in UEFI only mode, try the F11 key again. Your list should be smaller. Also, a good rule of thumb for installing a new OS is to only leave the drive you are installing the OS to plugged in. Unplug all other drives that you may have plugged in. I don't know why you would need to mess with the USB config settings in the BIOS. Everything is Enabled by default, so if the board is unable to recognize the drive, try another port. I wouldn't try to install from any port that isn't directly attached to the motherboard, just to be sure. EDIT: If UEFI only mode fails to recognize the drive in all ports, then you likely have a stick that has been configured for CSM. I would not install W10 in CSM mode. You miss out on some Security features, and you also increase your boot time by several seconds. EDIT: My bad, wardog ;)
Edited by twf85 - 13 Mar 2017 at 11:37pm |
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
Asrock99
Newbie Joined: 12 Mar 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Hi warhog. It's more like the USB works but the bio isn't detecting it. That's why I can't change to boot from the usb. BIOS hasn't been flashed yet because I'm stuck in the menu so I can't do anything else
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
Asrock99
Newbie Joined: 12 Mar 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Hi guys. I need with with my new build. In the BIOS, there isn't USB configuration under the advanced tab like the manual says. Did anyone have that problem and/or know the solution. Trying to install win10 via USB boot but can't since it doesn't give me the option to boot from it. My CPU is a ryzen 1800x in a phantek enthoo pro case if it helps.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |