Need help with AMD build S.OS

as for bios

ii if works now stable, then i may well be inclined to wait until about mid May when the better ryzen bios is released with agesa code 1005
but whatever you choose
please DO NOT UPDATE BIOS IN WINDOWS
use the choice to update in the bios or dos methods
it by far a much safer way

Thank you both Guys Datonyb, Xaltar, and the rest of people that helped me :D

So I will try that 67$ memory patriot, that is cheap, and is QLV verified, to be honest, I dont know if, is a good idea to update bios even if I dont have a high end gpu or something, so there i have no idea

Now the Psu suply uhmm how can tell if getting damage or performance issues? by checking the rails voltage and something like that? or if starts to like 12 to 12.5 or 12.0 or 11.9 etc? haha the way I type lol so embharassing hah x.x

But know seems like i will follow your advise, I guess i will by buying the 105$ motherboard the Asrock Fatality, and the cpu 1600 ryzen, and probably the patriot one because is the most cheap supported memory on the Asrock compatibility, also has 3200 mhz which i guess i would use less than 3200 with low timings, to avoid any issues, because i dont know anything about that brand modules. SO thanks alot guys!

When it comes to building new systems it is always best to go with a new PSU in case the old one is failing or damaged. That 750w PSU technically should be fine. If you have any issues once you build the system then the PSU would be the first thing to look at replacing. 

Xaltar wrote: [URL=][/URL]Given you are on a budget I would ignore RAM speed altogether. Get the cheapest kit that your board supports and put more of your budget into CPU or motherboard, better yet, pick up a nice new PSU to go with your build. Given you already have some components I am going to guess something happened to the CPU and motherboard you were using before? RAM speed is only important for gaming if you are using a current high end GPU, otherwise it really makes no difference. See this post I made here: http://forum.asrock.com/forum_posts.asp?TID=4963&title=ryzen-ram-frequency-and-gaming I hope this helps.

Wow xaltar thank you so much, i read the whole post, so just imagine my Gtx 580 nowadays is not even a mid range gpu right? and i was like thinking about in future get or grab a Rx 480, and thats event not a high end gpu as you describe in your post :O, even the Rx 480 with 3200 mz we wouldnt able to see the difference oh i see

So them, dont need to worry about MHZ speed right? but what about Low Timmings thats better right? it will make games run more smooth, with less latency? more responsiveness? like lets say a 2133 mhz or 2400 mhz with timmings 12-12-12 i dont know...

And do you think my PSU thermal take toughtpower 750 watts+bronze 80 is not that good for ryzen? I really dont know so much about Pc components, i always try my best, but im so grateful to be here in this forum, people so nice

But them again, i feel more relaxed with your explanation about speed mhz, but still with a doubt about timings, so can you please, guidance me a little bit? could you try to make a ryzen build for me? that can satisface overclocking in the future? like for a 400$?

Like a Motherboard and CPU,+rams? this is what i can buy for the moment
I've been searching straight foward around 4 days by looking a cheap build but that is like mid range or reliable, so thanks.

wardog wrote: clubfoot wrote: "Normally" G.Skill ram is not very overclockable...... Awwww.,Now you're full out looking for an azz whooping

Sir Wardog from the Mighty ryze team ,can you also contribuiting in my help :(? i know my English is worst than , haha, but I really need help my budget is 450$, and i wanted to find a good build that has
Ryzen 5 1600, a motherboard that is overclockeable, realiable long period, among a pair of ram ddr4 dual channel 8gb or 16gb that can be overclockeabe too, to have a happy future. Thnk you for your time.