Vision 3D (Sandy Bridge) vs Windows 10

Connecting to the internet and getting the windows updates worked out fine. So, an Asrock Vision 3D 137B is Win10 compatible.

Sorry for bumping such an old thread, but I also wanted to install Windows 10 on a Asrock Vision 3D 137B and I might have made some progress (using your tips also, thanks!).

I can confirm that even the latest beta bios from Asrock (L1.52a from 2011-Apr-14) doesn't give you the possibility to disable Intel HD Graphics. There is no way to disable 'Quick Sync' in the BIOS.

When installing Windows 10 it would crash with BSOD. Safe mode with networking was not possible.

Installing without an internet connection was successful.

Thank you!  After months of searching, and almost switching to Linux (to be fair, may still switch), disabling the QuickSync in the BIOS solved my problem.  Win10 worked on my ASRock Vision 3D HTPC (after doing a fix similar to what wardog suggested) at first, but after the anniversary update, even that fix (and many, many others) didn't work.  No matter what, Win10 tried to access the Intel graphics (even disabling it in the Device Manager didn't work).  Win10 would always try to load the Intel graphics, and the system would BSOD within a minute of loading.

The fix described above (disabling QuickSync in the BIOS, under the North Bridge settings) solved this. 

Thank you all!

You can also configure Windows 10 to not install every driver during the post installation configuration process, just don't choose the Win 10 Express settings.

Another easy workaround for Windows 10 installations, which I always do, is simply do not connect the PC to your network during the installation, or immediately afterwards. I always install my own drivers first on any Windows installation, I don't trust or want at least most of the drivers that MSoft will send my way.

Of course the problem with this PC is, since Lucid Virtu is one of its basic features, and is only supported in Windows 7, you don't have driver listings for other Windows versions. You could find most of the drivers and software on your own, but not all of them, more on that below.

Disable the IGP? Can you tell me how you enable it in your board's BIOS?

To this day, after all the years of Intel's integrated graphics, on all the desktop boards I've used and seen, there has never been an option that directly "disables" the IGP. The closest thing is the Share Memory option, but your BIOS does not have that option.

For the board in this PC, which only uses the IGP with Lucid, in the North Bridge Configuration screen in the BIOS, find the Quick Sync option, which is enabled by default. Set Quick Sync to Disabled to disable the IGP.

So, an option to disable the IGP is already in the BIOS.

As your PC's manual explains, the Quick Sync option (and Lucid Virtu) are only for use with Windows 7. This option must be disabled for any other OS (page 54.)

Apparently any problems caused by Win 10 installing a graphics driver for the Intel 3000 graphics in the three i5-2xxxM processors used in this PC, is because Intel does not have a Win 10 compatible driver for their 3000 graphics. For example, click on the Download Drivers link on this page, the specs for one of the processors used in the Vision 3D series:

https://ark.intel.com/products/53452/Intel-Core-i5-2450M-Processor-3M-Cache-up-to-3_10-GHz#@specifications

Now also tested on Windows 10 "Anniversary Update" (v1607):