|
X370 Fatal1ty Pro Stability - Need Help |
Post Reply 
|
| Author | |
MisterJ 
Senior Member 
Joined: 19 Apr 2017 Status: Offline Points: 1097 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: X370 Fatal1ty Pro Stability - Need HelpPosted: 21 Jul 2017 at 4:37am |
|
I just learned this from wardog a few days ago. It is mentioned in the Manual but not documented well. Screenshots can be taken in the BIOS. I tested this on my system by placing a FAT formatted USB stick in one of my top sockets and pressing F12. A time stamped .bmp file was stored on the USB stick. Great feature. Enjoy, John.
|
|
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
 |
|
|
Mojobaggins
Newbie 
Joined: 11 Jun 2017 Status: Offline Points: 11 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2017 at 4:21am |
Update to BIOS 3.0 Also, your screen shows your DRAM voltage at 1.34v not 1.35v. I also recommend changing the VDDCR_SOC Load-Line Calibration from Auto to Level 1. My VTT_DDR voltage is .68
Edited by Mojobaggins - 21 Jul 2017 at 4:23am |
|
|
|
|
MisterJ
Senior Member
Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2017 at 3:21am |
|
Nejaa, I am not an OCer, but I suggest you first try BIOS 3.00. Several have reported good results with some memory. One poster said slots A1 and B1 worked much better than A2 and B2 (the recommended) for his rig - might try that. For you reading pleasure:
http://forum.asrock.com/forum_posts.asp?TID=5630&title=amd-communitity-updates In particular - Update#4 and 14 July. Enjoy, John. |
|
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
|
|
|
Nejaa
Newbie
Joined: 06 Mar 2017 Location: USA Status: Offline Points: 30 |
Post Options
Thanks(0)
Quote Reply
Posted: 20 Jul 2017 at 11:06am |
|
I'm working on getting my memory to run at the rated speeds. I've had some great success, but have hit a wall.
Here's my kit: Galax HOF 2x8GB DDR4 3600 17-18-18-18-28 @ 1.35V. (HOF4CXLBS3600K17LD162C) I am running BIOS 2.4. I can run perfectly stable at 3466 16-16-16-36 and slightly lower than 1.35V. So, the issue is stability at 3600 and I've reached the limit of my technical knowledge when it comes to tweaking memory timings. As a side note, these are almost the same settings I run at 3466. This Imgur album has pics of my BIOS settings and what's reported by HWinfo. Give it a look. I hope you can find some inefficiencies. Thank you in advance!
|
|
|
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
Nejaa wrote: