Windows 10 MarvellTray HypoDuo Seveice |
Post Reply | Page 12> |
Author | |||||||||||||||||||||||
Expat
Newbie Joined: 27 Apr 2016 Status: Offline Points: 1 |
Post Options
Thanks(0)
Posted: 27 Apr 2016 at 12:24am |
||||||||||||||||||||||
This is more for Google than anyone else -
I am using several Marvell 9230 controllers (SYBA SI-PEX40064/StarTech PEXSAT34RH) and was unable to reliably get the "HyperDuo Service" to display in the left-hand tree menu, although on initial login the accelerator page displays correctly and is inaccessible if you ever click on another menu category. My workaround is as follows - it should work with any modern version of MSU:
You should now have a button on the top next to "Rescan" labelled "HyperDuo" as pictured below: It's not the prettiest, but it works. (It's prettier if you use a 4-5 letter word instead of "HyperDuo", but I could not mention the word I use in place of "HyperDuo" in polite company.) Cheers, Expat Edited by Expat - 27 Apr 2016 at 12:25am |
|||||||||||||||||||||||
edavis6678
Newbie Joined: 19 Dec 2015 Status: Offline Points: 1 |
Post Options
Thanks(0)
|
||||||||||||||||||||||
I had similar issue.
I had to uninstall and reinstall the MSU and it came back; the software sucks. Also, you *MUST* run as "administrator" to have the software run the HyperDuo Service, even if you have UAC turned off. |
|||||||||||||||||||||||
TrafficProducer
Newbie Joined: 08 Aug 2015 Status: Offline Points: 98 |
Post Options
Thanks(0)
|
||||||||||||||||||||||
MSU may be working now... Not fully tested
Using Windows 7 MSU Deleted HyperDuo and re-created HyperDuo under MSU |
|||||||||||||||||||||||
TrafficProducer
Newbie Joined: 08 Aug 2015 Status: Offline Points: 98 |
Post Options
Thanks(0)
|
||||||||||||||||||||||
MSU may be working now... Not fully tested
Using Windows 7 MSU Deleted HyperDuo and re-created HyperDuo under MSU |
|||||||||||||||||||||||
TrafficProducer
Newbie Joined: 08 Aug 2015 Status: Offline Points: 98 |
Post Options
Thanks(0)
|
||||||||||||||||||||||
|
|||||||||||||||||||||||
TrafficProducer
Newbie Joined: 08 Aug 2015 Status: Offline Points: 98 |
Post Options
Thanks(0)
|
||||||||||||||||||||||
As you see Marvell Configuration in the BIOS/UEFI,Ctrl+M worked well
After Delete HyperDuo in MSU initialising in MSU now.. (will take about 1/2 hour) So waiting to see what happens: This shows SSD/HDD ... waiting for HyperDuo in MSU initialising in MSU now. |
|||||||||||||||||||||||
TrafficProducer
Newbie Joined: 08 Aug 2015 Status: Offline Points: 98 |
Post Options
Thanks(0)
|
||||||||||||||||||||||
TrafficProducer
Newbie Joined: 08 Aug 2015 Status: Offline Points: 98 |
Post Options
Thanks(0)
|
||||||||||||||||||||||
Under MSU things like AES Port Management show
No available entry! ... etc..
|
|||||||||||||||||||||||
TrafficProducer
Newbie Joined: 08 Aug 2015 Status: Offline Points: 98 |
Post Options
Thanks(0)
|
||||||||||||||||||||||
Create RAID says : There are no available disks for creating.
I cleaned off HyperDuo.. All Drives seen as normal drives in Windows 10 if Marvell BIOS not set up, also shows on the left of the MSU: Testing the SSD, (in windows 10), formatted it to copy a file over to make sure it was working, then did Ctrl+M, on bootup for Marvel BIOS are re-settup SSD/HDD drives "Initialising", Function", etc all seemed to work OK as expected in Marvel BIOS... Went back to MSU Windows 7 which just looks better, displays more, than Win 8.1 MSU to me... Still the same In MSU ss if no SSD and HDD drive is seen under MSU on the left but not on the right: Below Physical Disk: port 0 is the SSD drive.../ Adapter 0 SSD It is not seen in Windows after Marvell BIOS this is normal for this, but it should show in the MSU but it shows on the left, as shown above, of MSU Windows 7 version, but no drive on Create HyperDuo / or RAID in MSU Looks lie a fault, bug, with Windows 10, and with the MSU to me. (Unix server?) Thanking You very much |
|||||||||||||||||||||||
TrafficProducer
Newbie Joined: 08 Aug 2015 Status: Offline Points: 98 |
Post Options
Thanks(0)
|
||||||||||||||||||||||
Installed UEFI L2.62 Beta, but no fix
|
|||||||||||||||||||||||
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |