New built pc, no post, no signal, mobo chipset red

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Another thread with similar issue. Description is bit vague and it's unclear if the user got his problem solved.

Edited by jarm - 28 Feb 2018 at 11:55pm

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
jarm Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 18 Sep 2017 Location: Estonia Status: Offline Points: 23	Post Options Post Reply Quote jarm Report Post Thanks(0) Quote Reply Topic: New built pc, no post, no signal, mobo chipset red Posted: 28 Feb 2018 at 11:43pm
	Another thread with similar issue. Description is bit vague and it's unclear if the user got his problem solved. Edited by jarm - 28 Feb 2018 at 11:55pm

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8907	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 15 Sep 2017 at 9:25am
	Dear Pengzj, Thank you for choosing ASRock and contacting us. Regarding your case, we provide some suggestion to try. 1. Clear CMOS to load BIOS default. Please check user manual p22 to clear CMOS. http://asrock.pc.cdn.bitgravity.com/Manual/X299%20Killer%20SLIac.pdf 2. Please check power supply is plug properly and power supply switch is on. 3. Please check the monitor is connecting properly and if it is possible please change a connecting cable and monitor to try. 4. Only install CPU, one stick memory and VGA card to check if the system can boot into BIOS properly. 5. Please try to install one stick memory at A1, B1, C1 and D1 slot to check if the system can boot into BIOS properly. 6. Reinstall CPU and check if CPU socket pin is fine. 7. If it is possible, please change another CPU or DRAM to check if the system can boot into BIOS properly. Thank you! Yours truly, ASRock TSD Edited by ASRock_TSD - 15 Sep 2017 at 9:26am

pengzj Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 13 Sep 2017 Status: Offline Points: 3	Post Options Post Reply Quote pengzj Report Post Thanks(0) Quote Reply Posted: 13 Sep 2017 at 1:42pm
	Hi, I just finished building my first pc but when I turn it on, there is no beep or post, no signal to my monitor nor my keyboard and my mouse. Right after the pc turned on, the board's chipset shows a white light and quickly switched to a red light that is fading in and out continuously. I can't find any information in the manual. The specs: ASRock X299 Killer SLI/ac Intel Core i7-7800X Skylake-X 6-Core 3.5 GHz CORSAIR Hydro Series H60 G.SKILL TridentZ Series 16GB (2 x 8GB) 288-Pin DDR4 3200 ZOTAC GeForce GTX 1080 Ti AMP Edition Thermaltake 650W ATX12V v2.4 Crucial MX300 2.5" 275GB Seagate FireCuda Gaming SSHD 1TB 7200 RPM I'm thinking that this mobo is faulty but am looking for solutions. If nothing works, I'll need to rma. Any help will be appreciated. Thank you.