H110 Pro BTC+ - Boot only once after CMOS Reset

After assembled the system (specs below), it can only be boot up once after clearing CMOS (unplugged the battery and short the CMOS jumper to reset position up to 4 hrs). I managed to install Windows 10 and this issue still exist. When it fails to boot up, I can see the LAN lights on and the CPU fan spinning but monitor is not displaying anything. Again, I will need reset CMOS before I can boot up once. I tried unplugged every power cable, RAM, harddrive and same thing would occur. I haven't even put GPU yet so pretty sure nothing to do with the GPU or risers. Any help/suggestions will be appreciated.