![]() |
M.2 Samsung shows up as removeable media |
Post Reply ![]() |
Page 12> |
Author | |
as_rocker3 ![]() Newbie ![]() Joined: 26 Mar 2018 Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() Posted: 27 Mar 2018 at 9:23pm |
@ cristy6100 Yes, I'm aware of that as I installed the AMD AHCI Driver to replace the quite old Microsoft's one. As for the Samsung NVMe Driver, I had that already installed of course. Well, I'll have to wait for a fix based on a new BIOS version I suppose .... ![]() |
|
Asrock Fatal1ty AB350 ITX/ac / Ryzen 5 2400G / Noctua NH-L9a M4 / G.Skill Flare X DIMM Kit 16GB, DDR4-3200 / Samsung M.2 960 Evo / HDPlex 160 / 300 Combo Power Supply
|
|
![]() |
|
cristy6100 ![]() Groupie ![]() ![]() Joined: 15 Mar 2018 Location: Romania Status: Offline Points: 269 |
![]() ![]() ![]() ![]() ![]() |
The driver you need is provided by Samsung here http://www.samsung.com/semiconductor/minisite/ssd/product/consumer/960evo/, give it a go and report back, tho I don't think it will help with this issue, it will help with Write/Read speeds.
This bug occurs only from bios 4.4x onward, 4.40 was not affected I tested this myself, but 4.40 has other problems, so no go there either, new bios is the only fix as far as I tested if you have Raven Ridge, for older CPU's you can downgrade to 3.xx Edited by cristy6100 - 27 Mar 2018 at 8:59pm |
|
![]() |
|
cristy6100 ![]() Groupie ![]() ![]() Joined: 15 Mar 2018 Location: Romania Status: Offline Points: 269 |
![]() ![]() ![]() ![]() ![]() |
Its because the nvme controller for the M.2 is not that one for which you installed the driver, the nvme is listed under Storage Controolers and is called Standard NVM Express Controller.
The one you listed is the 4 port 6Gbps SATA Controller that now has AMD Drivers instead of the Microsoft provided ones
|
|
![]() |
|
as_rocker3 ![]() Newbie ![]() Joined: 26 Mar 2018 Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() |
It didn't fix the issue actually .... ![]() |
|
Asrock Fatal1ty AB350 ITX/ac / Ryzen 5 2400G / Noctua NH-L9a M4 / G.Skill Flare X DIMM Kit 16GB, DDR4-3200 / Samsung M.2 960 Evo / HDPlex 160 / 300 Combo Power Supply
|
|
![]() |
|
cristy6100 ![]() Groupie ![]() ![]() Joined: 15 Mar 2018 Location: Romania Status: Offline Points: 269 |
![]() ![]() ![]() ![]() ![]() |
Keep us posted if the driver fixed your issue
|
|
![]() |
|
as_rocker3 ![]() Newbie ![]() Joined: 26 Mar 2018 Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() |
Germany indeed. |
|
Asrock Fatal1ty AB350 ITX/ac / Ryzen 5 2400G / Noctua NH-L9a M4 / G.Skill Flare X DIMM Kit 16GB, DDR4-3200 / Samsung M.2 960 Evo / HDPlex 160 / 300 Combo Power Supply
|
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
Sorry, meant Region. Not language. |
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
Or the newer ones NOT whql, 64-Bit only 1.3.1.277 just below it
Either. But test before and after. Never assume. |
|
![]() |
|
as_rocker3 ![]() Newbie ![]() Joined: 26 Mar 2018 Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() |
Asrock Fatal1ty AB350 ITX/ac / Ryzen 5 2400G / Noctua NH-L9a M4 / G.Skill Flare X DIMM Kit 16GB, DDR4-3200 / Samsung M.2 960 Evo / HDPlex 160 / 300 Combo Power Supply
|
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
Stock Windows release here. Microsoft Windows [Version 10.0.16299.309] German vs U.S.? -------- https://www.win-raid.com/t29f25-Recommended-AHCI-RAID-and-NVMe-Drivers.html Try these here. Pay attention to the Hardware ID's that you get the correct ones. I'm thinking yours should be same as mine, 7901, but check there on yours. Too, prior I'd maybe run two or three throughput tests to get an avg, the switch manually and do three more for an avg on the AMD ones. |
|
![]() |
Post Reply ![]() |
Page 12> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |