A320M Fail to create RAID0

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Dear Ridly,

Greetings, this is ASRock TSD.

We tested on A320M with two same HDDs.

We can set SATA mode to [RAID mode] and press [ctrl +r] to enter RAID configuration interface properly.
Then we could create RAID0 for the HDDs.

Please check the test result as below pictures:

Please be notice: we recommend clearing CMOS and retrying the above steps for verifying.

Thanks!

All the best,
ASRock TSD

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8937	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Topic: A320M Fail to create RAID0 Posted: 30 Mar 2018 at 8:14pm
	Dear Ridly, Greetings, this is ASRock TSD. We tested on A320M with two same HDDs. We can set SATA mode to [RAID mode] and press [ctrl +r] to enter RAID configuration interface properly. Then we could create RAID0 for the HDDs. Please check the test result as below pictures: Please be notice: we recommend clearing CMOS and retrying the above steps for verifying. Thanks! All the best, ASRock TSD

Ridly Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 11 Nov 2017 Status: Offline Points: 13	Post Options Post Reply Quote Ridly Report Post Thanks(0) Quote Reply Posted: 30 Mar 2018 at 5:19pm
	Fail to configure raid 0 with my two SATA hdds But when press CTRL+R buttons it does nothing, it just restarts the pc after some seconds.