Z370 Gaming K6 M.2 SATA RAID0 Issue |
Post Reply |
Author | |
roy3306
Newbie Joined: 26 Aug 2018 Status: Offline Points: 5 |
Post Options
Thanks(0)
Posted: 28 Aug 2018 at 5:35pm |
Bump
|
|
klimbo13
Newbie Joined: 27 Aug 2018 Location: roma Status: Offline Points: 5 |
Post Options
Thanks(0)
|
I've tried to just avoid the driver part, but as soon as I set up the RAID 0 and exit, the volume gets lost when I re-enter the BIOS. I have a Windows USB recovery media that I can use to install Windows on the RAID volume, but when I boot to the USB and try to install Windows, it doesn't detect the since volume at all. I'm not sure what else to try.
|
|
roy3306
Newbie Joined: 26 Aug 2018 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
I'm using an ASMEDIA port for my optical drive. No other SATA ports are being used.
|
|
RLGL
Senior Member Joined: 29 Jul 2018 Location: MN Status: Offline Points: 2010 |
Post Options
Thanks(0)
|
Asrock Z370 Gaming K6,Intel i7 8700K,
Asrock x570 Taichi |
|
roy3306
Newbie Joined: 26 Aug 2018 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Does this board support M.2 SATA RAID? I'm having issues with my 2 Samsung 860 Evo M.2 drives working in RAID 0.
I can create the RAID array with no problems but when I install Windows 10, it stops detecting one of the drives and the array fails. When I reboot the drive in M.2_1 is not detected by the BIOS and the RAID array is listed as failed in the RST bios menu. I've tried legacy mode as well with the same result. Latest BIOS is installed, latest firmware installed on the drives. Clean Windows 10 install. Any help would be appreciated. I'm thinking I got a faulty drive but I'm not sure. |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |