![]() |
Z170, DDR4 2666, low memory bandwidth "scores"... |
Post Reply ![]() |
Page <1234> |
Author | |
propergol ![]() Newbie ![]() Joined: 03 Feb 2016 Status: Offline Points: 22 |
![]() ![]() ![]() ![]() ![]() |
When I discovered that slow mem issue my bios was already modded with latest OROM, EFI, microcode etc... based on the official Asrock 1.50 bios. Also my Intel MEI firmware was updated to the latest version aviable (v11.0.0.1202). So I did revert to stock bios but nothing changed, the RAM speed was exaclty the same with moded or stock bios. The only thing I can think of is the MEI firmware that stay updated even if I did flashed back stock bios. I will try to downgrade it first, then check CPU socket. During my tests I did run at least 3x24h Prime95 test, each run with different setting, and the mem intensive one with 14GB to be used. So yes
![]() Edited by propergol - 07 Feb 2016 at 4:47am |
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 23258 |
![]() ![]() ![]() ![]() ![]() |
Good so at least the system is stable.
It may be worth running memtest and seeing if maybe the RAM itself has an issue.
|
|
![]() |
|
![]() |
|
propergol ![]() Newbie ![]() Joined: 03 Feb 2016 Status: Offline Points: 22 |
![]() ![]() ![]() ![]() ![]() |
What is very strange is this low mem read/write while CPUZ, AIDA, HInfo etc...report correct timmings, speed and so on.
When you look at Asrock Z170 bios updates changelogs there are a lot of "Improve DRAM compatibility"... Maybe it could be a bios issue even if my RAM sticks are listed as compatible. Anyway, will stop here for today and restart debugging tomorow
![]() |
|
![]() |
|
propergol ![]() Newbie ![]() Joined: 03 Feb 2016 Status: Offline Points: 22 |
![]() ![]() ![]() ![]() ![]() |
Ok, after some chat with Plutomaniac from www.win-raid.com it appear that it would be very unlikely that my MEI firmware's update would be responsable of my slow system memory.
So...next thing I did try is to bench my RAM not under Windows 10 pro but from a live Linux USB : exact same results, my memory bandwidth is as low as Windows tests. I now realy think that it is simply a Asrock bios compatibility issue with this RAM. Since it would probably take ages before Asrock acknowledge this compatibimity issue, I will purchase a new kit to test and confirm. Do you know of any particular 16GB dual channel kit that is 100% known as tested/working on the Z170 Asrock mobos? I would like (if possible) it to be rated @ 1.2V and avoid 1.35V kits, 2800MHz max (higher freq are ridiculously expansive). Thanks again for your help. Edited by propergol - 07 Feb 2016 at 11:28pm |
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 23258 |
![]() ![]() ![]() ![]() ![]() |
Well my board is the ASRock H170 Combo and the RAM used in the benchmark I provided is:
Corsair Vengeance LPX 2800 2x4gb CMK8GX4M2A2800C16R It wasn't overly expensive and even at 2133 performs quite well. Given my board is H170 based I do not have the option to run it at it's rated 2800 speeds. Generally if a kit is compatible with one board in a series it should be compatible with them all.
|
|
![]() |
|
![]() |
|
greddy ![]() Newbie ![]() Joined: 08 Feb 2016 Status: Offline Points: 14 |
![]() ![]() ![]() ![]() ![]() |
ASROCK Z170 has a problem with HYPER X FURY 2666
I have Z170 PRO4 and found out the same problem as you. Half score mem bandwidth I tried to go back to first BIOS v. and found that it worked for PRO4 is v.2.00 (now v.3.10) but if i go back to this v. it has a problem with RAM slot A2 and B2 which it was fixed on the higher v. So i've to put just only one RAM and open XMP profile and shut it down then i can go on Dual channel. AIDA64 test is normal. Asrock tech, you guys should check this immediately!!!!!!!!!. You may tried on BIOS 1.10 that should be okay.
Edited by greddy - 08 Feb 2016 at 2:23am |
|
![]() |
|
propergol ![]() Newbie ![]() Joined: 03 Feb 2016 Status: Offline Points: 22 |
![]() ![]() ![]() ![]() ![]() |
Interesting! My mobo is Z170M Extreme4 and the latest bios is 1.50 but if you face probleme with the same ram as me, I guess tha ball is in Asrock side. I will try to see what only one stick gives in XMP profiles. What I can see now with 2 sticks looks correct but I will give it a try. EDIT : @Xaltar I did check your ram and it is sadly not on Corsair compatibility list nor on the Asrock one.
Edited by propergol - 08 Feb 2016 at 12:30am |
|
![]() |
|
greddy ![]() Newbie ![]() Joined: 08 Feb 2016 Status: Offline Points: 14 |
![]() ![]() ![]() ![]() ![]() |
Hi there,
Yoy may try to go back down on 1.40 ---- 1.30 ---- 1.10 and see what v. is working. Now i may look to sell this RAM and buy G SKILL RIPJAW V instead.
|
|
![]() |
|
propergol ![]() Newbie ![]() Joined: 03 Feb 2016 Status: Offline Points: 22 |
![]() ![]() ![]() ![]() ![]() |
Flashed 1.40, 1.30 resetting CMOS each time : no luck.
I will try other brand and model : -G-Skill F4-2666C15D-16GRR Thanks to Amazon for its free return But that's definetly not serious from Asrock to list a memory kit as compatible when it is not... |
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 23258 |
![]() ![]() ![]() ![]() ![]() |
My RAM may not be on the list but it is tested and working in my system which is about as certain as you can get that it will work
![]() ![]() Kingston is one of the brands purportedly compatible with the "DDR4 OC" feature so I have a suspicion that may be where the problem is coming from. Do you have a "DDR4 OC" option under OC tweaker in your BIOS? It should only appear when a compatible RAM kit is installed in the system. If you do try testing the different settings it has available and see if that fixes your issue. I should have remembered DDR4 OC before
![]() |
|
![]() |
|
![]() |
Post Reply ![]() |
Page <1234> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |