![]() |
X670E Taichi crashes / reboots |
Post Reply ![]() |
Page <1234 15> |
Author | |
izeball ![]() Newbie ![]() Joined: 01 Nov 2022 Status: Offline Points: 50 |
![]() ![]() ![]() ![]() ![]() |
For me the 1.11 AS3 beta bios is a little bit better. After hibernate it only crashes sometime. Still hope another update will fix it for good.
|
|
![]() |
|
Akriant ![]() Newbie ![]() Joined: 03 Nov 2022 Status: Offline Points: 120 |
![]() ![]() ![]() ![]() ![]() |
1. Tried it 3 times. Didn't help. 2. Tried it multiple times. Didn't help 3. System works with iGPU when no video card is plugged in. No black screens. 4. Tried it twice. Didn't help 5. Tried it. Didn't help. Tried multiple video cards - the moment card goes into the system - boom, black screens on cold boot here I come. Something is definitely wrong with the bios settings in the mobo. Video card works fine in my other rig. |
|
![]() |
|
Akriant ![]() Newbie ![]() Joined: 03 Nov 2022 Status: Offline Points: 120 |
![]() ![]() ![]() ![]() ![]() |
Pretty much this. |
|
![]() |
|
Akriant ![]() Newbie ![]() Joined: 03 Nov 2022 Status: Offline Points: 120 |
![]() ![]() ![]() ![]() ![]() |
Tried 1.11.AS03[Beta]. Got the same "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly." on cold boot. Looked at Post Codes - they are random, as usual.
Rolled back to 1.07. It doesn't let me boot into bios with my 4090 (this is not an issue with 1.09 and so on) but since I installed Nvidia drivers once Windows loads drivers kick in and image appears, so I can navigate in-windows with 1.07 no problem. We'll see if the cold boot issue persists. Will update in the next 24h. |
|
![]() |
|
Akriant ![]() Newbie ![]() Joined: 03 Nov 2022 Status: Offline Points: 120 |
![]() ![]() ![]() ![]() ![]() |
1.07 bios use update:
1. Crashes - gone. No longer black screens on cold boot. Solid as a rock. 2.ASROCK logo doesn't appear at all, it's no signal on the monitor till Windows 11 loads. But, if I mash "delete" button from the start then I can get into bios/ Conclusion: Whatever Asrock's software engineers did to improve compatibility with RX 4090 cards also created this mess. Please fix the bios. Thanks, Akriant. |
|
![]() |
|
ASRock_TSD ![]() ASRock_Official ![]() Joined: 20 Mar 2015 Status: Offline Points: 8712 |
![]() ![]() ![]() ![]() ![]() |
Dear All,
Thank you for the reply. We modified a BIOS 1.11.AS05 which enhance the system stability for you, please test it. BIOS: 1.11.AS05: https://download.asrock.com/TSD/Desktop/BIOS/X670ETC1.11.AS05.ROM.zip If the issue persist, please help to check which code is showed on the debug led when the system crashed. Thank you, Best wishes, ASRock TSD |
|
![]() |
|
Akriant ![]() Newbie ![]() Joined: 03 Nov 2022 Status: Offline Points: 120 |
![]() ![]() ![]() ![]() ![]() |
Will give it a spin. For the record - not a single crash since reverting back to 1.07. Hopefully this one will do the trick and we'll have best of both worlds. Will update once I get a few cold boots in. |
|
![]() |
|
jmpatchin80 ![]() Newbie ![]() Joined: 05 Nov 2022 Status: Offline Points: 30 |
![]() ![]() ![]() ![]() ![]() |
I downloaded 1.11.AS05 and flashed it this morning before work. I then shut off my computer and let it sit for almost 8 hours to make sure it was sitting long enough to crash on first boot. I booted up my PC when I got home and it has not crashed. Everything works as expected. It looks like you guys nailed the issue with whatever was modified in the supplied bios. I will continue to monitor it but I can all ready tell this helped fix the crashing issues I was having. Thanks for the quick attention and have a great day!
|
|
![]() |
|
Akriant ![]() Newbie ![]() Joined: 03 Nov 2022 Status: Offline Points: 120 |
![]() ![]() ![]() ![]() ![]() |
1.1.AS05 fixed the issue. Thanks!
|
|
![]() |
|
izeball ![]() Newbie ![]() Joined: 01 Nov 2022 Status: Offline Points: 50 |
![]() ![]() ![]() ![]() ![]() |
For me the 1.11 AS05 also fixed the problems with the start after hibernating the Windows 10 system. So far it came up after several hibernates.
I won't install AS06 and wait for the next non-beta release. Thank you! |
|
![]() |
Post Reply ![]() |
Page <1234 15> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |