Where to fit a camera disc?

BrickBrian wrote: I have an ASRock H67M-GE and my wife has a Lumix camera with a 4GB Sandisc which I can't fit into the Tower unit.  I can see that there are a number of slots of different sizes but can't work out which one is the right one and which way up the disc should be.  Is there a diagram I could see and if so where can I find it.  Many thanks.

You will need to be much more specific about that camera. Lumix is a Panasonic brand name for many different kinds of cameras.

If it is just a standard digital camera, are you trying to connect this camera to the PC to save the pictures? If so, that is normally done with a USB cable connected between the camera and PC.

Camera's like this include the USB cable, since they usually use a micro-USB connector on the camera. The cable then has a standard USB connector on the other end for connection to a PC.

Another possibility, if the camera does not have a USB output, is the camera has a memory card that can be removed and put into a card reader that is connected to the PC. That is what it seems you are trying to do.

Camera memory cards, currently the "SD" types are common, of any kind cannot be connected directly to a PC mother board. The interface on the memory card is not used by PC mother boards.

You must get a card reader that is compatible with the memory card you have. It might not be an SD card, you need to find out the type of memory card that camera uses.

I would check for a USB output before getting a memory card reader.