![]() |
New B650 Riptide will not post unless CMOS cleared |
Post Reply ![]() |
Author | |
VLcakx517 ![]() Newbie ![]() Joined: 13 Mar 2023 Location: NEPA Status: Offline Points: 125 |
![]() ![]() ![]() ![]() ![]() Posted: 13 Mar 2023 at 7:46am |
Please help, I'm floored and dont know what to do. Building this for a cousin for an iRacing rig.
B650 Riptide non Wifi (newest 1.18 BIOS, also tried 1.11 and 1.14) Ryzen 7600 w/ air tower cooler Gskill 5600 2x16gb FlareX (serial # on supported list) WD Blue SN750 1TB (Serial # supported) TT Toughpower 750w PSU Zotac 3070Ti (but does the same with GPU removed First startup PC posted to BIOS. Plug in windows USB, save and exit, and goes into boot loop. Fought this for hours. Accidently found that if I clear CMOS it starts fine. I load and setup windows, update everything from first start up. Shut down and F2 into BIOS to enable EXPO and PBO, save and exit = boot loop. Restart = boot loop. Power off, clear CMOS and it starts into Windows fine. Install iRacing, play games for hours, shut down, restart, restart from no power...all good Restart into BIOS, change fan setting, save exit = boot loop. Wont restart unless I clear CMOS then it all works normal. I try restarting into BIOS and just click "save and exit" WITHOUT changing anything and it boot loops. Also does this on the internal graphics without the GPU. If I restart to BIOS, change 30 things but then click "discard and exit" and it boots and start fine. Plays games, runs cinebench, works normal. I have changed RAM with 3 different types, swapped hard NVME to the specific serial #s in the supported list. I am on my 2nd MoBo that I returned through Prime thinking it was bad. The only thing I havent swapped is the CPU, but since it works totally normal I never thought it could be that. Whats my next move? the tech support from AsRock through their 3 day delayed support sucks. This is like my 6 or 7th build and all have gone well. All were AM4 platforms and Im wishing I stuck to that instead of this AM5 crap. Any help would be appreciated. |
|
![]() |
|
VLcakx517 ![]() Newbie ![]() Joined: 13 Mar 2023 Location: NEPA Status: Offline Points: 125 |
![]() ![]() ![]() ![]() ![]() |
Tried the newest BIOS for the Riptide posted in another thread which was new as of 03/10/23. Did not change or fix anything im dealing with. Save/Exit out of BIOS regardless of changes = boot loop/ stall. Discard or start from a cleared CMOS and the PC runs fine as long as I stay out of BIOS.
|
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 23978 |
![]() ![]() ![]() ![]() ![]() |
The only suggestion I have is to make sure your RAM is in slots A2 and B2. I have
seen issues almost identical to yours when the wrong slots are populated (using 2 modules). If you haven't already, open a support ticket with ASRock: http://event.asrock.com/tsd.asp It doesn't matter if they get back to you or how soon, if this is a common issue it will draw their attention to it. Generally I find ASRock's support to be very good, a bit slow at times but always decent once you get a response. In this case it sounds like a bug, something ASRock will likely need to look into. |
|
![]() |
|
![]() |
|
VLcakx517 ![]() Newbie ![]() Joined: 13 Mar 2023 Location: NEPA Status: Offline Points: 125 |
![]() ![]() ![]() ![]() ![]() |
I have the RAM in the "first" slots and have tried the other two. I sent this as a formal tech question to asrock when I thought it was a Ram issue and all I got 3 or 4 days later was "try a lower expo speed". But the issue is it won't even let me enable expo or do anything in BIOS.
I gave up at this point and just going to return the MoBo through prime and ordered a Gigabyte board. Not gonna make the kid I'm building this for wait any longer. Sucks because I'm happy with my personal Asrock (B450 and 550 steel legends) stuff but going fwd with AM5 stuff I'll be avoiding them like the plague. |
|
![]() |
|
Ausboss ![]() Newbie ![]() Joined: 27 Apr 2023 Status: Offline Points: 30 |
![]() ![]() ![]() ![]() ![]() |
I?™m having the same problem exactly. This is a nightmare. Is there any solution?
|
|
![]() |
|
VLcakx517 ![]() Newbie ![]() Joined: 13 Mar 2023 Location: NEPA Status: Offline Points: 125 |
![]() ![]() ![]() ![]() ![]() |
Nope, never found a solution and no help from AsRock. I returned the board and got a Gigabyte b650m w/ wifi for the same price. Worked as it should. I'm currently building another AM5 pc for a friend as a gaming rig and I checked Asrocks website. I see they have 2 really new BIOS updates since I returned the board, but until I see others having success with them, I'll still be avoiding them.
|
|
![]() |
|
Ausboss ![]() Newbie ![]() Joined: 27 Apr 2023 Status: Offline Points: 30 |
![]() ![]() ![]() ![]() ![]() |
That sucks. I'm just out of the 30 day return window so I'm stuck with mine. I am going to try the support and the bios updates and maybe I can get something worked out. Your post did help me figure out I can reliably get it back up by pulling the cmos battery every time.
|
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 23978 |
![]() ![]() ![]() ![]() ![]() |
I posted before about using slots A2 and B2. The first 2 slots are slots A1 and A2.
The second 2 slots are slots B1 and B2. This is starting from the closest slot to the CPU. When using 2 modules you need to populate slots A2 and B2. A single module goes in slot A2. ![]() If you are still having issues, open a support ticket with ASRock: http://event.asrock.com/tsd.asp It can take a while to get a reply, particularly when there are national holidays in China/Taiwan. This is not an issue for European based countries that are filtered to ASRock's EU offices. |
|
![]() |
|
![]() |
|
uKER ![]() Newbie ![]() Joined: 07 Mar 2024 Status: Offline Points: 95 |
![]() ![]() ![]() ![]() ![]() |
No updates on this, right?
This just started happening to me overnight. Also B650M PG Riptide and 7600X. Came home to the PC being unresponsive a couple days ago. Reset and it doesn't POST. CPU and DRAM LEDs lit up. Clear the CMOS and it works, but change any setting, save and it goes dead again. If I go back to BIOS version 1.11 it starts working properly, but that's 11 versions behind, close to the initial release version. |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |