|
Z170 extreme4 dr.debug 04 |
Post Reply 
|
Page <1234> |
| Author | |
HappyMan 
Newbie 
Joined: 09 Aug 2016 Status: Offline Points: 19 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 11 Aug 2016 at 4:42am |
|
Thanks. I find menu item, but after disabling 04 code freez still left.
CMOS clear don't give any resulth. i noticed that 04 code is appears immediately after code 56. When system at stock frequency all works fine. I have 04 code on restart and shutdown without freezes. But when i try to overclock CPU i have 04 code freez randomly. |
|
 |
|
|
wardog
Moderator Group 
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 Aug 2016 at 5:57am |
|
I'm getting thin on options, but .......
Directly under the SATA ports is where your two BIOS chipa and the BIOS Select switch reside. Over the two BIOS chips is a sticker over each. 1. What CPU is it you're using? 2. What is printed on both stickers covering the BIOS chips? In asking those two ??'s I'm wanting to verify that your B BIOS(you have two, w/one, the B chip, being a backup) supports your processor BEFORE switching over to it. |
|
|
|
|
HappyMan
Newbie
Joined: 09 Aug 2016 Status: Offline Points: 19 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 Aug 2016 at 1:38pm |
|
CPU is i5 6400
Second bios version is 3.20 (a have updatetd it too) On second bios chip, the problem still remains. On both BIOS chips I have stickers with 1.00 or 1.10 numbers(exactly can say only when will be at home) |
|
|
|
|
HappyMan
Newbie
Joined: 09 Aug 2016 Status: Offline Points: 19 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 Aug 2016 at 1:46am |
|
sry. i have p2.10 numbers on both stickers.
maby i must try to flash another BIOS(more compatible with my RAM) ? Edited by HappyMan - 12 Aug 2016 at 2:30am |
|
|
|
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 Aug 2016 at 6:00am |
HERE you said you've already flashed the running A BIOS 3.40. If you did not, then yes. Use the Instant Flash method from within your BIOS in the Tools tab. Do not use the Internet Flash method as it is, IMHO, unreliable and will more easily corrupt your BIOS, rendering your board unusable. If you need instruction for using Instant Flash post back and I'll walk you through it. |
|
|
|
|
HappyMan
Newbie
Joined: 09 Aug 2016 Status: Offline Points: 19 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 Aug 2016 at 6:17am |
|
Yes I have 3.40 bios version on first chip and 3.20 on second. I
Asked about downgrade (if this possible) to which version? |
|
|
|
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 Aug 2016 at 11:01am |
|
No, don't downgrade. The last three BIOSes have had memory compatibility improvements.
Will you download and install CPU-z, start 4 instances of it to show me the SPD and Memory tab of each of the two sticks please. And I should say thank you for you patience too. It's not easy diagnosing over hours between forum posts. |
|
|
|
|
HappyMan
Newbie
Joined: 09 Aug 2016 Status: Offline Points: 19 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 Aug 2016 at 12:47pm |
|
No problem at all for me . Thank you for helping
http://imgur.com/a/NLeET http://imgur.com/a/wJfCP |
|
|
|
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 Aug 2016 at 2:09pm |
|
Whoa there. Looks like the BIOS is miscalculating these sticks main 4 timings and maybe CR(Command Rate).
Are you knowledgeable enough to change the timing manually in the BIOS? If so, let's attempt a mediocre timing by what tCL - 19 tRCP - 15 tRP - 15 tRAS - 36 CR - 1 (and if there's issues, change CR to 2 and retry) DRAM Voltage - 1.20 (and if there's issues, add +0.05v making +1.25 and retry. Fail at +1.25v? Bump another +0.05v making +1.30 and retry.) I'll be back here in 4-6hrs to look for any reply's/results. In a few minutes me and my Wife are driving out into the desert far away from light pollution to view/photograph the Perseid meteor shower. Edited by wardog - 12 Aug 2016 at 2:10pm |
|
|
|
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 Aug 2016 at 7:38pm |
|
I'm Baaaack. And up. For a little while anyways. T'was a long night here staring at the heavens.
|
|
|
|
|
Post Reply
|
Page <1234> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
HappyMan wrote: