|
G41C-GS Mems QVL |
Post Reply 
|
Page <12 |
| Author | |
NorTech006 
Newbie 
Joined: 03 Nov 2016 Location: Lisbon Status: Offline Points: 10 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 11 Nov 2016 at 4:50am |
|
[URL=][/URL][URL=][/URL]This build has one year. Now that i've managed QVL mems it only work @1333 in single channel on first slot.
I've inspected all CPU and mems pins, seems to be fine. Other thing, BIOS sets 1.60v and SPD is 1.50v. Are you relising new BIOS update for G41C ICH7 Chipset? Other thing, i've been _foruming_ and seems to be g41 problem (independent on brand) on 1333Mhz mems... Edited by NorTech006 - 11 Nov 2016 at 4:52am |
|
 |
|
|
NorTech006
Newbie
Joined: 03 Nov 2016 Location: Lisbon Status: Offline Points: 10 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Nov 2016 at 12:36am |
|
I'll check ddr3 slots and CPU pins.
Each module of 2gb 1333 as 8 cells. For me (i think ) the problem resides on the second slot of DDR3. With only one module in the 2ยบ Slot only runs @1000 Mhz. |
|
|
|
|
wardog
Moderator Group 
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Nov 2016 at 1:44pm |
|
Hmmm, I don't rightly know if this might be your issue or not.
I just looked over the Specs for your board and find this single vs double sided DIMM nugget:
How many chips does your DIMMs have? Edited by wardog - 07 Nov 2016 at 1:45pm |
|
|
|
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Nov 2016 at 1:37pm |
|
I hadn't replied because I didn't see anything wrong.
But now you state
Is this a new build? If so, 1. visually inspect the DIMM slots with a magnifying glass looking at the contacts aren't mal-aligned, 2. Pull the CPU and using the same magnifying glass, under a bright light source, look for bent and or missing pins. |
|
|
|
|
NorTech006
Newbie
Joined: 03 Nov 2016 Location: Lisbon Status: Offline Points: 10 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Nov 2016 at 2:49am |
|
Hi,
I dont know if it help. I've detected that the second slot DDR3 wont run @1333, while the first slot run perfectly well. Edited by NorTech006 - 07 Nov 2016 at 2:50am |
|
|
|
|
NorTech006
Newbie
Joined: 03 Nov 2016 Location: Lisbon Status: Offline Points: 10 |
Post Options
Thanks(0)
Quote Reply
Posted: 04 Nov 2016 at 3:02am |
|
Here are CPUZ Data:     Edited by wardog(Moderator) to insert pics Edited by wardog - 04 Nov 2016 at 9:15am |
|
|
|
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 04 Nov 2016 at 1:14am |
That P/N represents a single stick, not a matched kit. So, please grab CPU-z and post pics of each sticks Memory and SPD tab. That'll be 4 tabs to post. |
|
|
|
|
NorTech006
Newbie
Joined: 03 Nov 2016 Location: Lisbon Status: Offline Points: 10 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Nov 2016 at 6:52pm |
|
Hi,
The BIOS is 1.40c beta and the part number of the memories is TED32048M1333HC9 |
|
|
|
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Nov 2016 at 8:22am |
|
|
|
NorTech006
Newbie
Joined: 03 Nov 2016 Location: Lisbon Status: Offline Points: 10 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Nov 2016 at 4:33am |
|
Hi,
I've got a G41C-GS and 2 memories Team 2*2GB ( QVL ). With one stick it works at 1333 mhz. With two sticks it only works at 1000 mhz. Do you know any config that makes dual channel at 1333. |
|
|
|
|
Post Reply
|
Page <12 |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
***In order to maximize the system memory, please install