ASRock.com Homepage
Forum Home Forum Home > Technical Support > Intel Motherboards
  New Posts New Posts RSS Feed - Cpu support for z97m Formular
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

Cpu support for z97m Formular
 Post Reply Post Reply Page  <12345>
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
odiebugs View Drop Down
Newbie
Newbie


Joined: 07 Jul 2015
Status: Offline
Points: 193 		Post Options Post Options   Thanks (0) Thanks(0)   Quote odiebugs Quote  Post ReplyReply Direct Link To This Post Posted: 18 Jul 2015 at 2:59am
Originally posted by balotus balotus wrote:

hey parsec

yes there should be but no such options. thats the main problem. no option for IGPU what so ever. and no option that would indicate that i have a 5775c other that the nameing.

Cheers

Kim
Everything you have said is in your BIOS,  I mean it's there for all CPU's not just Broadwell.

Something is wrong, could be a bad chip,  do you have another 1150 CPU  that you can drop in and see if your CPU is the problem, or can you get access to a different 1150 board and drop it in and see. 

This is why I said it from the beginning,   no matter what CPU, the UEFI has the options you said, so even if the code wasn't in you still should see them. 

You should contact tech support from ASrock website and tell them new UEFI version has missing settings and ask for a new UEFI chip, if there is no change after the new chip I would return board.  There is a slight chance the Broadwell could be the problem. 


Edited by odiebugs - 18 Jul 2015 at 3:23am
asrocking
Back to Top
balotus View Drop Down
Newbie
Newbie


Joined: 16 Jul 2015
Status: Offline
Points: 37 		Post Options Post Options   Thanks (1) Thanks(1)   Quote balotus Quote  Post ReplyReply Direct Link To This Post Posted: 18 Jul 2015 at 3:57am
hey odiebugs

it works with a I5-4460 also tryed that. thats what bugs me alot, i havent tryed the i7 5775c in a other motherboard. Tho i have to look ad see if i got one laying around somewhere =)

Cheers

Kim
Back to Top
odiebugs View Drop Down
Newbie
Newbie


Joined: 07 Jul 2015
Status: Offline
Points: 193 		Post Options Post Options   Thanks (0) Thanks(0)   Quote odiebugs Quote  Post ReplyReply Direct Link To This Post Posted: 18 Jul 2015 at 4:42am
Originally posted by balotus balotus wrote:

hey odiebugs

it works with a I5-4460 also tryed that. thats what bugs me alot, i havent tryed the i7 5775c in a other motherboard. Tho i have to look ad see if i got one laying around somewhere =)

Cheers

Kim
To me, with you having the newest UEFI, it sounds like the I7-5775 is causing the problem. 

If the UEFI is ok with another CPU but the 57 causes the UEFI to be missing settings, really sounds like CPU.

I think your best bet is to talk to tech support, this is a forum and hard to say when a tech will see it.

They can run scenario's, and see  if they can get this same problem, and they know more about the boards.

Notice how many problems Intel has had with this CPU and the delays.


P.S. Thanks for being such a nice and patient poster, you're one of the best and everyone hopes you get this resolved quickly.  

Thumbs Up 


Edited by odiebugs - 18 Jul 2015 at 4:52am
asrocking
Back to Top
balotus View Drop Down
Newbie
Newbie


Joined: 16 Jul 2015
Status: Offline
Points: 37 		Post Options Post Options   Thanks (1) Thanks(1)   Quote balotus Quote  Post ReplyReply Direct Link To This Post Posted: 18 Jul 2015 at 5:17am
hey odiebugs
 
Yes I am going to talk to the tech support about this again, but now its weekend, so ill send them a log of what I have been testing out, maybe its just something funny that are missing and can get fixed, im also gonna take a talk with the intel support about this, never hurts to learn more about stuff Smile
 
Well, this can maybe help others too, so being patient is going to help all  Wink


Edited by balotus - 18 Jul 2015 at 5:17am
Back to Top
odiebugs View Drop Down
Newbie
Newbie


Joined: 07 Jul 2015
Status: Offline
Points: 193 		Post Options Post Options   Thanks (0) Thanks(0)   Quote odiebugs Quote  Post ReplyReply Direct Link To This Post Posted: 18 Jul 2015 at 6:34am
The newest VGA broadwell driver for win 7, 8.1 and 10 that is WHQL, - 15.40.3.64.4248

It's not on any board  MFG site.  


Edited by odiebugs - 18 Jul 2015 at 6:36am
asrocking
Back to Top
Xaltar View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 16 May 2015
Location: Europe
Status: Offline
Points: 25073 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Xaltar Quote  Post ReplyReply Direct Link To This Post Posted: 18 Jul 2015 at 12:55pm
Have you tried examining the motherboard for bent pins in the CPU socket or dirt/thermal compound on the CPU pads?

Good luck.
Back to Top
balotus View Drop Down
Newbie
Newbie


Joined: 16 Jul 2015
Status: Offline
Points: 37 		Post Options Post Options   Thanks (0) Thanks(0)   Quote balotus Quote  Post ReplyReply Direct Link To This Post Posted: 18 Jul 2015 at 2:57pm
Hey Xaltar

Yes i did that too when i change the cpu's. all the pins are fine, and the cpu don't have anything on it. i even toke the hole pc apart. Just in case i was missing something, but it did'ten change anything. i even ran a prime to see if the cpu was not working ( using a discret graphic card ) and the cpu part works fine. tho its reporting that the max boost is 3.6 when its 3.7.

So all in all this is whats missing atm.

IGPU settings ( in total everything with a IGPU. it just dosent work/see it )
Wrong CPU settings ( It aint detecting the CPU correct. is it getting to hot? No. Water cooling is used )

The thing with these Broadwell cpu's are that they are a half tock from intels tick tock cycle. Some of the things this cpu have is the same as Skylake. so its a tricky one.

Cheers

Kim


Edited by balotus - 18 Jul 2015 at 6:03pm
Back to Top
parsec View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 04 May 2015
Location: USA
Status: Offline
Points: 4996 		Post Options Post Options   Thanks (0) Thanks(0)   Quote parsec Quote  Post ReplyReply Direct Link To This Post Posted: 19 Jul 2015 at 4:09am
So none of the UEFI options exist when using your Broadwell CPU, and even the Beta UEFI provided by ASRock?!

That is wild and unheard of, as you know. I hope you understand any skepticism about this, since it is an issue that is unheard of. ASRock was confident that that UEFI version would work, but if you say it doesn't... how can we not believe it.

Speaking of believing it, if you really want to get our attention, put a USB flash drive in a USB 2.0 port on the board's IO panel. Then go into the UEFI, bring up the screens that should but don't have the options for the Intel iGPU, make sure they are in the area they should be on the screen, and if applicable, click on the settings for an option, like Onboard and PCI Express on the Primary Graphics Adapter.

Then press the F12 key on the keyboard. The current UEFI screen display will be saved to the USB flash drive. You can then post one of more of those pictures, and make your case without any doubt.

One other thing, about all I've got to offer, is do you have the Intel IME software installed? That is the Intel Management Engine driver ver:10.0.0.1204.

Most people are skeptical about the need of this software on a 'Z' board with a 'K' processor, but do we really know what Intel has wrapped up in this software? I'm somewhat surprised that a new version of the IME software is not available for Broadwell.
Back to Top
balotus View Drop Down
Newbie
Newbie


Joined: 16 Jul 2015
Status: Offline
Points: 37 		Post Options Post Options   Thanks (0) Thanks(0)   Quote balotus Quote  Post ReplyReply Direct Link To This Post Posted: 19 Jul 2015 at 4:46am
Hey Parsec
 
Nope none. here are the screenshots http://imgur.com/a/7gYke and yeps, I got the intel ME on the system. all with loaded default option.
 
Cheers
 
Kim


Edited by balotus - 19 Jul 2015 at 4:47am
Back to Top
odiebugs View Drop Down
Newbie
Newbie


Joined: 07 Jul 2015
Status: Offline
Points: 193 		Post Options Post Options   Thanks (0) Thanks(0)   Quote odiebugs Quote  Post ReplyReply Direct Link To This Post Posted: 19 Jul 2015 at 4:55am
Originally posted by balotus balotus wrote:

Hey Parsec
 
Nope none. here are the screenshots http://imgur.com/a/7gYke and yeps, I got the intel ME on the system. all with loaded default option.
 
Cheers
 
Kim
Now did you really miss the slider to bring up the rest of the options,  move the long slider down and take a screen shot again so we can see if there really missing.

Also the OC tweak screen and move the slider so that the  primary plane current is at the top so we can see below at the GT settings.


Edited by odiebugs - 19 Jul 2015 at 5:01am
asrocking
Back to Top
 Post Reply Post Reply Page  <12345>
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.188 seconds.