|
970 Pro3 R2.0 problems |
Post Reply 
|
Page <12 |
| Author | |
wardog 
Moderator Group 
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 10 Dec 2016 at 10:34pm |
Change that DRAM Voltage to 1.5, as it should be, Save and Exit from the BIOS. Do this before proceeding ANY further!! 1.7 is too too much. |
|
 |
|
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Dec 2016 at 10:31pm |
|
Just won't work. @Xaltar and ari Kingston HX316C10FK2/8 is shown on Kingstons Compatibility List as compatible: https://www.kingston.com/us/memory/search?DeviceType=7&Mfr=ASR&Line=Motherboard&Model=80343 There's very little reason this memory won't work. If the BIOS comes up and recognizes it and your temps are ok I'm betting someone is booting an old OS install that is not compatible. |
|
|
|
|
ari
Newbie 
Joined: 10 Dec 2016 Status: Offline Points: 13 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Dec 2016 at 10:25pm |
|
it is the windows from my "old" system
specs windows 7 64 bit power # sf 500 a14a cpu # 8320e gpu # r9290 - also tested hd5850 and hd4850 ram # hx316c10fk2/8 - also tested khx1333c9d3b1k2/4g hdd # wd1600js-23mhb0 - windows wd7500azex-00rkkao i also tested win safemode (per F8) and it crashed always after atipci.sys the bios set dram voltage to 1.7 , but both rams support 1.5 v - are im wrong here ?- is this a different think ? i will try you tip with msconfig.exe maybe tomorow Edited by ari - 10 Dec 2016 at 11:06pm |
|
|
|
|
Xaltar
Moderator Group
Joined: 16 May 2015 Location: Europe Status: Offline Points: 26813 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Dec 2016 at 9:48pm |
|
Is this with a fresh windows install or are you trying to use a previously installed windows version from another system?
Is this a new build or one that was working and then stopped? What are your full system specs? Please include power supply make and model, RAM make and model number and any extra peripherals you may be using. If you are trying to boot into an OS from a previous build then there is your problem. You can't use an old OS install that was set up on different hardware, it will not have the correct drivers for the system to boot properly. It is always best to perform a fresh OS install with a new build/major upgrade. It is possible to make it work but it requires a few steps before moving the drive to the new system. I do not recommend using an old OS install on a new system as it will cause issues but if you must: Boot into windows on the original system (whatever motherboard was used with the drive originally) Run MSconfig.exe Set the system to boot into safe mode on the next boot Save and exit without restarting Shut down Install the drive on the new motherboard and boot You should boot into safe mode if all went well Run MSconfig.exe again and uncheck safe mode then restart
|
|
|
|
|
|
|
ari
Newbie
Joined: 10 Dec 2016 Status: Offline Points: 13 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Dec 2016 at 9:22pm |
|
hello
i have an 970 Pro3 R2.0 and i cant boot windows after 10 secs of seeing windowsboot system restarts i finaly realize that my ram is not on the supportlist its and hyperx hx316c10fk2/8 in uefi the ram is shown correct is the ram the reason for the systemfailure ? specs windows 7 64 bit power # sf 500 a14a cpu # 8320e gpu # r9290 - also tested hd5850 and hd4850 ram # hx316c10fk2/8 - also tested khx1333c9d3b1k2/4g hdd # wd1600js-23mhb0 - windows wd7500azex-00rkkao Edited by ari - 10 Dec 2016 at 11:06pm |
|
|
|
|
Post Reply
|
Page <12 |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
ari wrote: