![]() |
H170M-ITX/ac Hyperthreading |
Post Reply ![]() |
Author | |
Convoy ![]() Newbie ![]() Joined: 26 Feb 2017 Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() Posted: 26 Feb 2017 at 6:39pm |
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
I'll say this with a sense of humor in mind yet you should really begin with a processor that has hyper-threading ![]() https://ark.intel.com/products/88179/Intel-Pentium-Processor-G4400-3M-Cache-3_30-GHz If and then, Hyper-Threading would appear as an option in the BIOS to Enable or Disable. Don't feel alone. This happens here occasionally that someone does the same mistake. |
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
I feel your pain.
No reply needed. |
|
![]() |
|
Convoy ![]() Newbie ![]() Joined: 26 Feb 2017 Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() |
wardog has Ryzen :-)
Where is that "bangs head on table" smiley? :-) Elsewhere I found wrong info stating it has hyperthreading. It's no big deal. It's just a low power HTPC and handles everything quite well. So I feel no pain at all. But I do feel kinda stupid because I'm a frequent ark.intel visitor. (I don't like their new layout) Thanks for your replies wardog!
Edited by Convoy - 27 Feb 2017 at 1:36am |
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Online Points: 27173 |
![]() ![]() ![]() ![]() ![]() |
Thinking a Pentium had hyperthreading used to be a silly notion, now with Kaby Lake however it is quite true:
http://www.tomshardware.com/news/intel-cpu-hyper-threading-pentium,33386.html The 4400 however is Skylake and thus does not support it ![]() If you just purchased the 4400 I would flash your BIOS to the latest version, see if you can return it and pick up a hyperthreaded Kaby Lake Pentium as it is supported by your board.
|
|
![]() |
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
Copy that! Bring back the old layout Intel. This new one makes my eyes sore trying to locate if the G4400 has Hyper-Threading ![]() |
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
For an HTPC the G4400 should serve(pun intended) you well.
A good NIC/PHY and a decent disk subsystem, you're off to the races. |
|
![]() |
|
Convoy ![]() Newbie ![]() Joined: 26 Feb 2017 Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() |
Tried to follow Xaltar's advise and flashing by motherboard (v1.5->7)
Internetflash doesn't work because it can't write to my harddisk. So I downloaded the bios manually. Unzipped it. Put it on a flashdrive. The biosutil searches the flashdrive and reports it doesn't contain an image.
|
|
![]() |
|
wardog ![]() Moderator Group ![]() Joined: 15 Jul 2015 Status: Offline Points: 6447 |
![]() ![]() ![]() ![]() ![]() |
First, seeings BIOS 1.70 contains an Intel ME BIOS Firmware update, after flashing you should download and install for your OS the latest Intel ME and Intel INF's from your MB's download page: http://www.asrock.com/mb/Intel/H170M-ITXac/?cat=Download After updating the two above, please reboot twice before continuing. Doing this via Instant Flash, download the H170M-ITXac(7.00)ROM.zip file and extract from within it the actual flash file named H17MXAC7.00 . Move this .00 file to the root of a FAT32 formatted thumb drive. Place the thumb drive into one of the USB 2.0 ports above the multi-use PS/2 port at the MBs rear I/O panel. Reboot and enter the BIOS to the Tools tab. There you'll find the Instant Flash utility. Click on it and a popup will(should) appear with the H17MXAC7.00 file highlighted. In the popup click Start and it will take of and begin flashing the BIOS. When finished it may prompt for a reboot so allow it. Post back with any further issues. Edited by wardog - 27 Feb 2017 at 1:28pm |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |