|
OC problem |
Post Reply 
|
Page <123> |
| Author | |
Drain_Bamaged 
Newbie 
Joined: 14 Jul 2017 Location: Lalaland Status: Offline Points: 48 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 20 Jul 2017 at 9:33am |
|
That's pretty rough justqw. I don't even have to disable Cstates or CoolNQuiet. 3.8ghz @ 1.35v. ( defaultvcore+ 0.11 offset) Ram @ 2933.
Edited by Drain_Bamaged - 20 Jul 2017 at 9:37am |
|
 |
|
|
justqw
Newbie
Joined: 06 May 2017 Status: Offline Points: 26 |
Post Options
Thanks(0)
Quote Reply
Posted: 20 Jul 2017 at 9:44am |
|
MisterJ, I did a few tests (with BSOD) today, but in c:\Windows\Minidump I dont see any dumps today, weird. Last dmp was 3 days ago.
|
|
|
|
|
MisterJ
Senior Member 
Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2017 at 3:25am |
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
|
|
|
justqw
Newbie
Joined: 06 May 2017 Status: Offline Points: 26 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2017 at 6:53am |
|
Minidumps: https://file.io/jnwpSU
My system works fine on defaults settings without any customization in BIOS. When I try to overclock it responses bsod every time (OCCT tests). Windows (7) always starts fine. I can check OC settings which give me 1% to efficient if You tell me what to set. -- Regards
Edited by justqw - 21 Jul 2017 at 6:54am |
|
|
|
|
MisterJ
Senior Member
Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2017 at 8:09am |
|
justqw, I get a HTTP 404 (Not Found) on the link you posted. I am not an OCer, but would like to look at your dumps. Hopefully others will help with the OCing. I do not understand what this means:
|
|
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
|
|
|
justqw
Newbie
Joined: 06 May 2017 Status: Offline Points: 26 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2017 at 9:47am |
|
|
|
PetrolHead
Groupie 
Joined: 07 Oct 2015 Status: Offline Points: 403 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jul 2017 at 3:27pm |
|
Don't just blindly try values others have gotten to work, you might break your components that way. There's no guarantee that your system can achieve the same OC someone else has, even if you have the exact same components. If you want to OC, you should do it incrementally, moving at 100 MHz steps upwards and only increasing voltages in small bumps when the CPU starts to get unstable. During every phase you should monitor your temperatures and voltages to see how much headroom you should have. You said temperatures are OK, but what exactly are the temperatures you get for each sensor?
Btw, have you tested your memory? |
|
|
Ryzen 5 1500X, ASRock AB350M Pro4, 2x8 GB G.Skill Trident Z 3466CL16, Sapphire Pulse RX Vega56 8G HBM2, Corsair RM550x, Samsung 960 EVO SSD (NVMe) 250GB, Samsung 850 EVO SSD 500 GB, Windows 10 64-bit
|
|
|
|
|
justqw
Newbie
Joined: 06 May 2017 Status: Offline Points: 26 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 Jul 2017 at 1:45am |
|
Finally some progress..
Problem was is bios version, either 2.50 and 3.0 (both Agesa 1.0.0.6) didn't work well. Bios 2.40 brought me CPU OC with my previous settings. So.. Agesa 1.0.0.6 in my configuration doesn't work at all after OC. Settings: - Disable C6 Mode - Disable Global C states - CPU Frequency (MHz) - 3800 - CPU Voltage (V) - 1.35 - CPU Vcore Voltage - Fixed 1.35 - VDDCR_SOC Voltage - Fixed 1.1 Temperatures read from HW64 and reached max. 82 C. This is quite much I guess. Do You have similar temp. values? Now I'm fighting with RAM OC. -- Regards |
|
|
|
|
Drain_Bamaged
Newbie
Joined: 14 Jul 2017 Location: Lalaland Status: Offline Points: 48 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 Jul 2017 at 1:53am |
|
Dude, this platform is so flaky. I had a stable system until this morning. Using much the same settings. Now it boot cycles if I use that profile. I started from scratch, enabled XMP for RAM at 2933 and it boots no problem. If I do that AND overclock the CPU, it boot cycles. It makes no sense.
procODP set at 53.3, tried 60 no change, soc at 1.1. It just boot cycles. I totally regret getting a Ryzen 1600. This is the worst, flakiest overclocknig experience Ive had in 10+ years. Should have just got a 1600x or a 1700.
|
|
|
|
|
PetrolHead
Groupie
Joined: 07 Oct 2015 Status: Offline Points: 403 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 Jul 2017 at 2:32am |
If that's the CPU temp then it's a tad too high. I don't have a Ryzen myself, but 75 degrees should be okay under stress testing and in other use it should stay below that. For the 1700X and 1800X the initial maximum "safe" temperature was 95 C, but don't let this confuse you. Those chips had a temperature offset of +20 C, so the "real world" value at 95 C was 75 C. This offset has since been removed, AFAIK. |
|
|
Ryzen 5 1500X, ASRock AB350M Pro4, 2x8 GB G.Skill Trident Z 3466CL16, Sapphire Pulse RX Vega56 8G HBM2, Corsair RM550x, Samsung 960 EVO SSD (NVMe) 250GB, Samsung 850 EVO SSD 500 GB, Windows 10 64-bit
|
|
|
|
|
Post Reply
|
Page <123> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
I can check OC settings which give me 1% to efficient if You tell me what to set.