|
H110 pro+ btc gpu problem. |
Post Reply 
|
Page 123> |
| Author | |
Kinowa 
Newbie 
Joined: 04 Aug 2017 Status: Offline Points: 8 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: H110 pro+ btc gpu problem.Posted: 04 Aug 2017 at 12:57pm |
|
Hi I got new asrock h110 pro+ btc, 1600w, 5x1080ti connected with risers & 8+6 pin to each card, Windows 10, 8 gb memory, Samsung ssd.
When i boot into Windows my gpus gets error code 43. Is there anything i need to change in settings in Windows or bios to get the 5 cards to work together? This is a video of device manager after booting in to Windows Youtube |
|
 |
|
|
parsec
Moderator Group 
Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
Quote Reply
Posted: 04 Aug 2017 at 9:49pm |
In the UEFI/BIOS, Chipset Configuration screen, is the Above 4GB MMIO BIOS assignment option set to Enabled? Also in the same screen, is the IOAPIC 24-119 Entries option set to Enabled? Did you connect power cables from your PSU to the three extra power connectors on the board? |
|
|
|
|
|
|
Kinowa
Newbie
Joined: 04 Aug 2017 Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Aug 2017 at 12:06am |
|
|
|
Kinowa
Newbie
Joined: 04 Aug 2017 Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Aug 2017 at 4:04am |
|
|
|
parsec
Moderator Group
Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Aug 2017 at 10:10am |
|
A Device Manager 43 error is very generic, it could mean a broken device, or a driver problem, or other problems.
So you tried to use all five cards installed at the same time, and you get this error? Did you install a driver for these cards? If you tried to get all five running at the same time, try just using only one or two at first. If that works, then add one more card, and then one more, etc. It is common when using many cards that you need to install them one at a time. You also are using the risers for the first time, right? So you don't know yet if everything is working right. |
|
|
|
|
|
|
|
Kinowa
Newbie
Joined: 04 Aug 2017 Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Aug 2017 at 10:42am |
|
I did try only one card yesterday, today i am going to try 1 card but different cards.
Yes i try using both old and new driver. Is it drivers needed for there risers? I have another PC i can use to see if it works on that one, im playing games on that one and also use gtx 1080ti but different motherboard. |
|
|
|
|
LennartB
Newbie
Joined: 04 Aug 2017 Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Aug 2017 at 8:24pm |
|
I recently purchased an ASRock H110 Pro BTC+ as well, but am using 3x Radeon Vega Frontier GPU's. Kinowa, did windows automatically recognize your gpu's? I've been living on these forums (and the instruction manuals) for about 3 days and have tried just about everything, but still can't get it to recognize a single card.
|
|
|
|
|
Kinowa
Newbie
Joined: 04 Aug 2017 Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Aug 2017 at 9:46pm |
|
It Will only recognize it as a video display component or what not until i Install nvidia, then after booting it will be labelled as nvidia gtx 1080ti
Im thinking its the motherboard thats the problem, and its like no place to get help from niether =D Im going to connect The risers to my gaming pc later and see. If that works i will change Motherboard. |
|
|
|
|
LennartB
Newbie
Joined: 04 Aug 2017 Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: 06 Aug 2017 at 5:51am |
|
I'm thinking that it could be a motherboard problem as well.
I'm about to create a post with everything that I've done(and failed) to resolve the issue. Unfortunately, it seems like our set up is so new that we're the only tech support, but I'll be sure to write about it here when I get everything working.
|
|
|
|
|
Darktrop
Newbie
Joined: 08 Aug 2017 Location: Bel air md Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Aug 2017 at 5:24pm |
|
Error code 43 is a riser problem. Change out the riser make sure all power is correct
And WILL work absolutely. Problem with this MB is running more than 8 gpu on windows 10 I think enabling onboard video may solve the problem I have 8 gpu 1070's running on a 1000power supply Msi afterburner settings at 70% power drawing 900 watss hashing 239 mh/s ethereum on claymore |
|
|
|
|
Post Reply
|
Page 123> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
Kinowa wrote: