AGESA 1.0.0.6b

Hey datonyb, whats wondering if these XMP settings that shows the Thaipoon burner+ this software Ryzen Dram calculator, are correct? if so, should i manually settings all these configurations? included proc0t, RTT Nom, RTT Wr, RTT PARK, CAD settings, VTT,PLL, dram, sock voltage, and etc,etc?

I was wondering if you can guidance me or someone else here? thanks :D


Thaiphoon burner of my ddr4 rams:



Ryzen Dram Calculator:

@KLU,

datonyb wrote: KLU wrote: Thank you! I will try that out. I didn't even know there is such a tool for Ryzen :) Great stuff, I hope it will help! EDIT: I can't believe it actually even booted into Windows with 2933MHz I just need to test if it's stable. I'm gonna play some games, render some stuff etc. https://valid.x86.fr/h9k41c Thank you so much, man! You have no idea how I've been struggling with this sh*t. no problem mate as soon as i see the picture of your subtimings i knew there was issues just there ! probably explains why we have so much trouble with corsair ram (its trying to set too tight timings  for the hynix chips on the ram sticks)

@datonyb, actually when I am turning the PC on, I have F9 error only one time, it shuts down, powers back on and starts normally, even the fail count is set to 3. Isn't that strange?
Which setting would you recommend to lower/increase to try make it stable at cold boot (Gear Down is enabled)?
Thanks, I appreciate your time.

PS. I downloaded newer version of the Ryzen calc (0.9.9 v3) and this time it showed some settings differently: https://imgur.com/a/sd24U
Particularly tRRDS, tRTP, RTT NOM and higher SOC Voltage.


Edited by KLU - 30 Oct 2017 at 10:53pm

Thank you! I will try that out.

I didn't even know there is such a tool for Ryzen :) Great stuff, I hope it will help!

EDIT:

I can't believe it actually even booted into Windows with 2933MHz I just need to test if it's stable. I'm gonna play some games, render some stuff etc.

https://valid.x86.fr/h9k41c

Thank you so much, man! You have no idea how I've been struggling with this sh*t.


Edited by KLU - 29 Oct 2017 at 9:56pm

KLU wrote: Hi datonyb. Thanks a lot for your help, I appreciate that. I hope this helps: https://imgur.com/a/6G1Lr Cheers!

trying to upload a picture with data/settings now to photobucket to host for you .......its playing about with my upload please wait for a while


EDIT OK FINALLY GOT THE IMAGE UPLOADED

right heres YOUR ram sticks and the values entered into the ryzen mem calculator which seems to be doing very well

PLEASE NOTE your automatic xmp values seem to be pretty bad for the am4 platform
one glaring issues seems to be the stock tcwl ( cas write latency) which is set stock xmp to 12
the ryzen calculator suggests 15 to match tcl cas latency (which is normal) for most sticks of ram
BUT ..........THE AM4 BIOS will not allow odd numbers for this cas latency so your system sets it as 16  i suggest you also set the tcwl to 16

also maybe tfaw at 36 or 43 (instead of suggested 34 ) if you are struggling to get it stable

other than that follow the guidelines in this screenshot (maybe try 1.375 volts as well)




Edited by datonyb - 29 Oct 2017 at 8:07pm