New Ryzen Build Issues |
Post Reply | Page <123 |
Author | |
zfournier
Newbie Joined: 13 Dec 2017 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
im having issues downloading on to my usb drive now. the drive wont load on 2 different computers, it seems to lock everything up when it is connected. im going to see if i can find a different usb.
ill look at that link about the gpu too |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 25028 |
Post Options
Thanks(0)
|
First rule out the hard disk. By your description it sounds like your drive may be dying. I have had similar symptoms on systems I have repaired that were caused by bad drives.
100% drive usage could be caused by faulty cache on the drive, bad sectors being remapped constantly, read errors the drive is trying to correct etc. When building a new system or even just upgrading the first thing in the bin from the old build should always be the mechanical hard disk (if you have one), particularly if it is more than 5 years old. Mechanical drives are prone to failure, especially Seagate Barracuda drives from the mid 2000s for some reason. I have seen more than a dozen fail shortly after warranty..... My guess would be a bad batch of components or poor design choices in that period. It only seems to have effected the Barracuda line however.
|
|
|
|
zfournier
Newbie Joined: 13 Dec 2017 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
okay cool. i just went and got a new thumb drive, downloading the window creation tool on to it right now.
tomorrow morning ill try booting and doing a clean install on the ssd installed. wish me luck |
|
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
zfournier, no, no, do not DL anything onto the USB stick. DL the Media Creation Tool to your system (Desktop) and execute it. Plug your new USB stick in and tell the tool to create a USB stick and point to the new Stick. Enjoy, John.
|
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
zfournier
Newbie Joined: 13 Dec 2017 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
yes thats what i did.
so i have the new windows on the computer, clean install. downloading drivers. |
|
zfournier
Newbie Joined: 13 Dec 2017 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
im already experencing freezes. the first one started after i did the drivers for my video card.
windows update is completely caught up but im randomly freezing. |
|
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 25028 |
Post Options
Thanks(0)
|
If the system is stable without the video drivers installed I would hold off on RMAing anything. I would try using DDU (Display Driver uninstaller) in safe mode and see what happens when you reboot. If the system is stable then try with different display driver versions and see if any are stable for you.
If you have not already, clear CMOS and see if it helps stability.
|
|
|
|
dreadkopp
Newbie Joined: 06 Nov 2017 Status: Offline Points: 11 |
Post Options
Thanks(0)
|
for me the freezes / crashes happen in Linux using nouveau as well: This is a dmesg log up until freeze: If your problem is the same as mine DDU and other driver version will not help you i guess. Not sure if related to the GPU or the Motherboard OR the CPU. My next attempt is switching the GPU from a 1060 to a 1050ti. if this does not help a new mainboard it is :/
|
|
zfournier
Newbie Joined: 13 Dec 2017 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
i tried uninstalling the drivers, but i will try again tomorrow. ive pretty much tried everything at this point. clearing cmos, everything it just freezes up.
im ordering a new mobo anyways unfortunately. ill try some more trouble shooting tomorrow tho anyways. |
|
Post Reply | Page <123 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |