| Author |
 Topic Search  Topic Options
|
Valacer 
Newbie
Joined: 19 Jan 2018
Status: Offline
Points: 7
|
 Posted: 21 Jan 2018 at 5:21am |
 augustobotossi wrote:
I did directly in my KIller SLI and worked without a problem. |
Thanks mate.
|
 |
PetrolHead
Groupie
Joined: 07 Oct 2015
Status: Offline
Points: 403
|
Posted: 21 Jan 2018 at 6:11am |
wardog wrote:
Gasp!
PH, you of all people here know better than chasing BIOS releases 
|
 I do know better, but the lure of those larger numbers is too stronk... ;) So far I've been patient and stuck with the 3.30 I installed the minute I powered up my new rig, though. I haven't even really though about trying out older versions to see if I can push my rig furhter than its current state. However, it may just be a matter of time before I find myself flashing the BIOS to some other version...
|
|
Ryzen 5 1500X, ASRock AB350M Pro4, 2x8 GB G.Skill Trident Z 3466CL16, Sapphire Pulse RX Vega56 8G HBM2, Corsair RM550x, Samsung 960 EVO SSD (NVMe) 250GB, Samsung 850 EVO SSD 500 GB, Windows 10 64-bit
|
|
Kirurgs
Newbie
Joined: 09 Jun 2017
Status: Offline
Points: 136
|
Posted: 21 Jan 2018 at 7:36am |
kodachrome wrote:
ASRock Gaming k4 x370 here.. going to try revert to 3.4 too.?
Completely crap bios, very annoyed, will likely ditch this board as its been terrible with both sets of DDR4 I tried (both on compatible lists).? |
Absolutely disagree :) I have R1700 (OC 3.7, +0.025V offset, 1.0V VDDC)+ x370 K4 + hynix 2x8GB 3200 cl16 corsair memory, finally I was able to achieve memory at 2933, all I did was overclock cpu, leave asrock setting on OC, enable xmp, lower memory from 3200 to 2933 and all works (it would not boot at 3200, but did not try anything to help). I will not OC this system to max it possibly can, mild OC is fine for me. Best bios so far, at least for me.
|
|
CPU: Ryzen 5600X
MB: Fatal1ty X370 Gaming K4 (BIOS 7.03)
RAM: CMK16GX4M2B3200C16, works with 3200 by default on 7.03 bios (previously I could not go higher than 2933)
|
|
Samoflan
Newbie
Joined: 22 Jan 2018
Status: Offline
Points: 1
|
Posted: 22 Jan 2018 at 2:21am |
Heckinwoofer wrote:
After updating my BIOS to 4.40, DRAM voltage keeps changing back to 1.35V.
I was able to get stable OC on my RAM on BIOS 3.40 at 3466MHz 1.45V, but now with the new BIOS I can't, even with the exact timings which are all set manually.
MB: AB350 ITX/ac CPU: Ryzen 3 1300X RAM: Team Vulcan 16GB 3000MHz 16-18-18-38 (Hynix M-die)
|
I am having the same issue. Using the XMP profile for 3200Mhz. I need adjust the voltage to 1.4v to be stable. But every time I restart, the voltages are set back to 1.35v. I didn't have this issue before updating my bios to 4.40
Edited by Samoflan - 22 Jan 2018 at 2:29am
|
|
J Z
Groupie
Joined: 09 Sep 2016
Location: Germany
Status: Offline
Points: 976
|
Posted: 25 Jan 2018 at 11:03pm |
|
If you use the "AMD CBS Setting", you should deactivate XMP and set it manually under UMC.
Then the set Vdimm remains. At the moment do not mix XMP with the switch "AMD CBS Setting" !!!
|
|
Kind Regards,
JZ
https://shop.JZelectronic.de - Der Shop mit ausgesuchter ASRock Profi Hardware
https://www.facebook.com/asrock.de
|
|
Prodif
Newbie
Joined: 11 Apr 2017
Status: Offline
Points: 79
|
Posted: 29 Jan 2018 at 7:57pm |
X370 Taichi when you plan to upgrade agesa to version PinnaclePI 1.0.0.0a / 1.0.7.2a ?
A month ago wrote to official tech support of those about problems with firmwares v3+, so still no who answered. event.asrock.com/tsd-networking.asp 
Edited by Prodif - 29 Jan 2018 at 9:12pm
|
|
ASRock x370 Taichi (bios v2.36) / Ryzen-1800X / Crucial CT16G4DFD824A x2 / GPU: AMD R9 NANO / SSD NVMe Samsung 960 PRO MZ-V6P1T0BW (M.2) / HDD SATA 3TB x6 / PSU: Corsair AX860i
ps. RedDragon, by AG
|
|
kerberos_20
Senior Member
Joined: 06 Dec 2017
Location: czech republic
Status: Offline
Points: 3657
|
Posted: 29 Jan 2018 at 9:54pm |
i was wondering does anbody have working amd pbs settings? when i set unused gpp clocks off to enabled, nothing happens when i set clkreq to enabled, pc wont boot, it freezes after BDS (no error code), when i press reset button, i get F9 error and pc shuts down, then it starts up, but thats all it does... anything voltage related has no effect whatsoever whats the point then?
Edited by kerberos_20 - 29 Jan 2018 at 9:56pm
|
|
nolive721
Newbie
Joined: 29 Jan 2018
Location: japan
Status: Offline
Points: 87
|
Posted: 30 Jan 2018 at 9:06am |
I spent couple of hours last night trying 4.4 and 4.6 BIOS on my PRO4
CPU OC either with asrock or AMD CBS settings seems not as stable as it was with 3.3.either when I OC in the BIOS or via the A-tuning software, it would eventually crash on AIDA64 stress testing after few minutes (OC at 3.8Ghz, Ram at default 2133Mhz) or freeze after few seconds with extreme OCing (3.9Ghz, again RAM at default)
I have not done any in game testing, will do later this week
now with my Corsair RAM OCing, 4.4 BIOS would not give me any better results than the 3,066Mhz I was achieving with 3.3.just repeated cold boot and no post in windows But with 4.6Bios, AMD CBS and UMC specific RAM settings have allowed me to post in windows at 3,200Mhz for the very 1st time since I have built this rig I didn't have the chance to do any monitoring or stress testing though because windows froze after a minute he had reached the desktop it could be that I didn't set the Ram voltage higher than the 1.35V default this BIOS gives now. with 3.3 Bios, I had to set my RAM at 1.375V to be stable at 3,066Mhz so that could be the root cause
will also do more investigation here because there is lot more fiddling in the BIOS ram settings I had no time to make last night that could bring my system stable so I wont bash Asrock for now, it seems a step in the right direction
|
|
3500X 4.4Ghz at 1.25V B550M Steel legend; 16GB CORSAIR LPX-3200 C16 running at 3333Mhz; 248GB NVME; VEGA 64 LC GPU OC 1700Mhz core 1150Mhz VRAM
|
|
kerberos_20
Senior Member
Joined: 06 Dec 2017
Location: czech republic
Status: Offline
Points: 3657
|
Posted: 30 Jan 2018 at 10:05pm |
|
for 3200 u dont need more than 1.35v
try to reduce resistance in cad/proc/rtt
|
|
Ohoho
Newbie
Joined: 04 Feb 2018
Location: PrOLAND
Status: Offline
Points: 1
|
Posted: 04 Feb 2018 at 8:00am |
Heckinwoofer wrote:
After updating my BIOS to 4.40, DRAM voltage keeps changing back to 1.35V. |
Same here (X370 GAMING X), new BIOS(4.50) doesn't save dram voltage. @edit But there's a good thing i can change frequency and voltage in custom P-States  .
Edited by Ohoho - 04 Feb 2018 at 5:17pm
|
|
R5 1600
ASRock X370 Gaming X
G.SKILL TRIDENT-Z @3333C14 [F4-3200C14-8GTZ]
RX580 8GB SAPPHIRE NITRO+
|
|
Tweet
AGESA PinnaclePI-AM4 1.0.0.0