|
X399 Gaming does not boot up |
Post Reply 
|
Page <12 |
| Author | |
Bexley 
Newbie 
Joined: 20 Jan 2018 Status: Offline Points: 10 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 22 Jan 2018 at 7:37am |
|
Thanks. I will try to clear bios and then boot up the mother board tonight
|
|
|
TR4 1950X, X399 Pro Gaming, G.SKILL Flare X F4-3200C14D-16GFX, Corsair RM850i, Samsung 960Pro M.2 512GB, ASUS GeForce 1050 Ti, Corsair H100i v2, Corsair Obsidian 750D, WD Red Nas 8TB
|
|
 |
|
|
MisterJ
Senior Member 
Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 Jan 2018 at 12:33am |
|
Bexley, I assume that RM850i means 850 Watts. I have a similar system and suggest you stick to the 850 Watt supply. Please get down to minimum by removing all but one stick of memory and video card-no SSD, no HDD, etc. Is this really all the storage you have? I would rather see your specifications in your signature as I have them. Make sure the 8-pin and 4-pin power cables plugged into the the CPU area of the board are CPU and not PCIe and the cables plugged into the video card are not CPU. Also make sure the 4-pin cables are not rotated 90 degrees. We have seen that more than once. You can also remove the video card and see if it will power up and POST. Thanks and enjoy, John.
|
|
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
|
|
|
zlobster
Groupie 
Joined: 02 Sep 2017 Status: Offline Points: 403 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jan 2018 at 11:04pm |
|
I'd suggest you take out all of the components out. Check and re-seat all power cables. Take the mobo out of the case and lay it on a non-conductive material, e.g. wood, cardboard, etc.
After all this, take out the CPU and check for bent pins in the socket. Re-seat the CPU, its cooler and 1 stick of RAM. Clear the CMOS by taking out the battery, PSU power cord and pressing power on button for 10s. Put the battery back, plug the PSU power cord in the wall socket. If you don't get any beeps or Dr.Debug codes during boot now, I'd say it's RMA time. |
|
|
1700X ZP-B1 (stock); X370 Taichi (UEFI 3.10); 16GB F4-3200C14-8GFX XMP; 256GB 960 EVO; RX 580 NITRO+ 8GB
|
|
|
|
|
Bexley
Newbie
Joined: 20 Jan 2018 Status: Offline Points: 10 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jan 2018 at 2:54pm |
|
I noticed a similar issue has been reported before:
http://forum.asrock.com/forum_posts.asp?TID=6211&PN=2&title=x399-taichi-wont-boot-up shlashly finally power up his system by changing his power supply to EVGA 750 G3. Initially I was using RM650x and I thought this is the same issue. But after I replaced it by RM850i, nothing changed at all.
|
|
|
|
|
Bexley
Newbie
Joined: 20 Jan 2018 Status: Offline Points: 10 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Jan 2018 at 2:48pm |
|
After pressing the power button on the PC case or on the mother board, the system does not boot up. No Dr Debug code, no fan starts spinning, and no beep sound. Only the mother board LED flashes in red color. I have tried to reconnect the 24pin ATX cable, 8pin cpu cable and 4pin cpu cable but nothing changed. CPU: 1950X MB: X399 Gaming PSU: Corsair RM850i and RM650x Memory: G.SKILL 4x8GB 3200 C14 Graphic Card: Asus 1050 Ti SSD: Samsung 960 Pro 512 GB |
|
|
|
|
Post Reply
|
Page <12 |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options