![]() |
z170 Extreme 4+ G.Skill 2800 No Dual Channel |
Post Reply ![]() |
Author | |
Akela ![]() Newbie ![]() Joined: 09 Oct 2015 Location: Germany Status: Offline Points: 4 |
![]() ![]() ![]() ![]() ![]() Posted: 09 Oct 2015 at 4:26am |
Hi,
is something wrong with this RAM or is the board really not supporting this chips ? I can only run these things in singlechannel. 2x 8GB G-Skill RipJaws F4-2800C16D-16GRR Tested A2+B2 and A1+B1 Both Modules are running in A1+A2 singlechannel BIOS 1.50 I5 6600K GTX760 Dr.Debug loops with 00 19 4C CMOS was cleared. With Bios 1.0, fresh from the BOX i had Post-code 55 in A2+B2 Thx for help Edited by Akela - 09 Oct 2015 at 2:58pm |
|
![]() |
|
ASRock_TSD ![]() ASRock_Official ![]() Joined: 20 Mar 2015 Status: Offline Points: 8712 |
![]() ![]() ![]() ![]() ![]() |
Dear customer,
Thank you for the query. We provide some suggestions for try: 1. Due to the memory controller is located in CPU, please reinstall the CPU and check whether there's any bent or broken pins in CPU socket. 2. If possible, please use another CPU or memory to verify. 3. If possible, please install the memory to another motherboard to verify. Kindest regards, ASRock TSD Edited by ASRock_TSD - 16 Oct 2015 at 7:33pm |
|
![]() |
|
excaliburn92 ![]() Newbie ![]() ![]() Joined: 19 Sep 2015 Status: Offline Points: 11 |
![]() ![]() ![]() ![]() ![]() |
If they don't run in dual channel even after trying all the slots and they work fine in single channel mode , then it's probably the RAM. See if you can get a replacement.
|
|
![]() |
|
Akela ![]() Newbie ![]() Joined: 09 Oct 2015 Location: Germany Status: Offline Points: 4 |
![]() ![]() ![]() ![]() ![]() |
Thanks,
i've send all back to the dealer. (mindfactory) They said, CPU and RAM seems to be ok, got a new board. will see |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |