Bios recovery

Please list system configuration elese we cant help you

Main Rig: AMD Ryzen 2400G | ASRock Fatality X370 ITX/ac UEFI 4.90 | Corsair LPX DDR4 2400@3200 1.35V | Corsair RM650i PSU | CM ML120L AiO Cooler

I am guessing you are using a ASRock A320m pro4 or ASRock b350m pro4?

If you are, please reset UEFI to defult by removing battery and unplugging power supply for 10 minutes (remove the power supply cable completely) wait 10 minutes then place back UEFI battery, if still no boot, try another reset by Clear CMOS jumper, move jumper from pins 1-2 to pins 2-3 for about 10 minutes, if still no boot your UEFI is most probably corrupted because of a bad flash. Please try mentioned solution and report back

EDIT: I now saw you already cleared CMOS, in this case the UEFI is almost 100% corrupted, you can try one last thing:

Reset CMOS another time by jumper if possible without removing power, just do as I said above, then remove video card and HDD and SSD if you have one, plug monitor in motherboard hdmi/dvi port and check again, be sure to but jumper back to pins 1-2 before starting the PC

If still no boot, you will need to send to board for warranty from where you bought it or RMA if warranty is not available

PS:

That error was cause by a bad installation media it had nothing to do with the UEFI of the board, never try to update the UEFI if you are not sure about it, if you tried to install Windows from USB most probably a bad USB stick or bad ISO image of Windows was the cause of the error, also please be aware that AM4 only officially supports Windows 10 x64 and partially Linux with latest Kernels, so much more true for the Ryzen 2xxx series CPU's.

Do not try to install Windows 8 or older or any 32 bit operating systems because you will have only problems with them.

Download the Windows 10 ISO from Microsoft website using the "Media Creation Tool" and use a 8GB or more USB stick.

As a side note, Windows 7 is not supported on the AM4 platform at all

Edited by cristy6100 - 24 Apr 2018 at 12:35am

Main Rig: AMD Ryzen 2400G | ASRock Fatality X370 ITX/ac UEFI 4.90 | Corsair LPX DDR4 2400@3200 1.35V | Corsair RM650i PSU | CM ML120L AiO Cooler

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Onelon Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 23 Apr 2018 Status: Offline Points: 4	Post Options Post Reply Quote Onelon Report Post Thanks(0) Quote Reply Topic: Bios recovery Posted: 23 Apr 2018 at 10:33pm
	It was not possible to install Windows because of the error "the bios in this system is not fully acpi compliant" decided to update bios, after the update is now a black screen. Whether prompt it is possible to restore somehow bios?Tried to do a cleaning of the cmos and take out the battery does not help. Board ab350m-hdv

cristy6100 Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 15 Mar 2018 Location: Romania Status: Offline Points: 269	Post Options Post Reply Quote cristy6100 Report Post Thanks(0) Quote Reply Posted: 23 Apr 2018 at 11:57pm
	Please list system configuration elese we cant help you
	Main Rig: AMD Ryzen 2400G \| ASRock Fatality X370 ITX/ac UEFI 4.90 \| Corsair LPX DDR4 2400@3200 1.35V \| Corsair RM650i PSU \| CM ML120L AiO Cooler

Onelon Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 23 Apr 2018 Status: Offline Points: 4	Post Options Post Reply Quote Onelon Report Post Thanks(0) Quote Reply Posted: 24 Apr 2018 at 12:04am
	Gtx 1050 ti AMD ryzen 3 2200g Samsung 4 gb x2 WD blue 1tb Zalman le2 500w

cristy6100 Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 15 Mar 2018 Location: Romania Status: Offline Points: 269	Post Options Post Reply Quote cristy6100 Report Post Thanks(1) Quote Reply Posted: 24 Apr 2018 at 12:22am
	I am guessing you are using a ASRock A320m pro4 or ASRock b350m pro4? If you are, please reset UEFI to defult by removing battery and unplugging power supply for 10 minutes (remove the power supply cable completely) wait 10 minutes then place back UEFI battery, if still no boot, try another reset by Clear CMOS jumper, move jumper from pins 1-2 to pins 2-3 for about 10 minutes, if still no boot your UEFI is most probably corrupted because of a bad flash. Please try mentioned solution and report back EDIT: I now saw you already cleared CMOS, in this case the UEFI is almost 100% corrupted, you can try one last thing: Reset CMOS another time by jumper if possible without removing power, just do as I said above, then remove video card and HDD and SSD if you have one, plug monitor in motherboard hdmi/dvi port and check again, be sure to but jumper back to pins 1-2 before starting the PC If still no boot, you will need to send to board for warranty from where you bought it or RMA if warranty is not available PS: That error was cause by a bad installation media it had nothing to do with the UEFI of the board, never try to update the UEFI if you are not sure about it, if you tried to install Windows from USB most probably a bad USB stick or bad ISO image of Windows was the cause of the error, also please be aware that AM4 only officially supports Windows 10 x64 and partially Linux with latest Kernels, so much more true for the Ryzen 2xxx series CPU's. Do not try to install Windows 8 or older or any 32 bit operating systems because you will have only problems with them. Download the Windows 10 ISO from Microsoft website using the "Media Creation Tool" and use a 8GB or more USB stick. As a side note, Windows 7 is not supported on the AM4 platform at all Edited by cristy6100 - 24 Apr 2018 at 12:35am
	Main Rig: AMD Ryzen 2400G \| ASRock Fatality X370 ITX/ac UEFI 4.90 \| Corsair LPX DDR4 2400@3200 1.35V \| Corsair RM650i PSU \| CM ML120L AiO Cooler