|
ASRock Z370 Gaming K6 problem with XMP Profile |
Post Reply 
|
| Author | |
danceman96 
Newbie 
Joined: 23 Apr 2018 Status: Offline Points: 3 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: ASRock Z370 Gaming K6 problem with XMP ProfilePosted: 23 Apr 2018 at 6:05pm |
|
Hello, i have problem with speed of my ram Corsair Vengeance LPX DDR4, 2x8GB, 3466MHz, CL16 (CMK16GX4M2B3466C16) - when i set up XMP profile with standard 3466MHz after PC reboot it restarts to 2133MHz. But when i set up XMP profile and manually choose to 3100MHz it can run. I also tried to switch ram voltage to 1.5 V but it didn't help. Bios is updated to the newest version (1.80) MOBO: ASRock Z370 Gaming K6 CPU: i7 8700K |
|
 |
|
|
kokoloko
Newbie
Joined: 24 Apr 2018 Status: Offline Points: 5 |
Post Options
Thanks(0)
Quote Reply
Posted: 24 Apr 2018 at 6:57pm |
|
Hi,
I have Crucial 8GB DDR4 3466MHz CL16 Ballistix Elite 1 stick only (2nd is on it's way) and XMP only works if I put it in A2 slot. Works fine at 3466 CL16. If I put it in the A1 it won't go past 2133. Do you have your sticks in B2/A2 slots? The manual shows this is the proper config for 2 sticks. EDIT: The solution was IO-L Init Value. Can somebody explain the IO-L Init Value?
You can find it in the OC Tweaker 4th Timings. I changed the standard value (auto=4) to 5. Now the modules run at 4.133mhz at specified Timings (A2 B2 socket). I downvolted the kit to 1.35v. primestable for 1 hour now. So the kit runs nicely on this board but i ve no clue what the IO-L Init Value does. even 4.266mhz boot so far 1.4v Edited by kokoloko - 24 Apr 2018 at 7:00pm |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options