Z370 Extreme4 Boot manager doesn't work properly |
Post Reply |
Author | |
salomonfr
Newbie Joined: 07 Jun 2018 Location: RU Status: Offline Points: 8 |
Post Options
Thanks(0)
Posted: 07 Jun 2018 at 12:24pm |
Hello everyone!
Motherboard: Z370 Extreme 4; BIOS: 1.80; Problem: Can't select any device in boot manager (F11). Only can hit the setup or boot defaults. |
|
ASRock_TSD
ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8592 |
Post Options
Thanks(0)
|
Dear Salomonfr,
Thank you for choosing ASRock.
Regarding your case, we provide some suggestion to try. 1. Clear CMOS to load BIOS default. You can follow the user manual page 20 to clear CMOS. http://asrock.pc.cdn.bitgravity.com/Manual/Z370%20Extreme4.pdf 2. Reflash BIOS by Instant Flash. http://www.asrock.com/mb/Intel/Z370%20Extreme4/index.asp#BIOS
Thank you! Yours truly, ASRock TSD |
|
salomonfr
Newbie Joined: 07 Jun 2018 Location: RU Status: Offline Points: 8 |
Post Options
Thanks(0)
|
badbri
Groupie Joined: 20 Feb 2018 Location: USA Status: Offline Points: 415 |
Post Options
Thanks(0)
|
In your picture it looks like you have some video corruption. Are you using on-board video ? If so try using the DVI port if not already. If using an Add-on PCIe video try pulling it out and reseating it or try the on-board video. If none of the above helps then you most likely need to rma/replace the board.
|
|
https://www.passmark.com/baselines/V9/display.php?id=99573335296
|
|
salomonfr
Newbie Joined: 07 Jun 2018 Location: RU Status: Offline Points: 8 |
Post Options
Thanks(0)
|
Tried everything you suggest, nothing helped. I detached all my ssd's and something still appears in boot manager. Actually when I install motherboard was totally fine, maybe it appears after flashing new bios.
|
|
ASRock_TSD
ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8592 |
Post Options
Thanks(0)
|
Dear Salomonfr,
Thank you for your information.
We have released a special BIOS P1.80B. Please update this BIOS by Instant flash to check. Download link: https://mega.nz/#!w4xx2TgS!vfjcK_yxNcqOqTwdxxoODNmTTxy2819mhBO41hRuB8E
Thank you! Yours truly, ASRock TSD |
|
salomonfr
Newbie Joined: 07 Jun 2018 Location: RU Status: Offline Points: 8 |
Post Options
Thanks(0)
|
I tried re-flash with that BIOS, it didn't help Partition with hieroglyphs still exists. Interesting thing: if you select this partition and hit enter, then boot manager works fine, you can highlight the partition you want and select it.
|
|
ASRock_TSD
ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8592 |
Post Options
Thanks(0)
|
Dear Salomonfr,
Thank you for your reply. We have released another special BIOS P1.80C for you to try. Please update this BIOS by Instant flash. Download link: Thank you! Yours truly, ASRock TSD
Edited by ASRock_TSD - 14 Jun 2018 at 3:03pm |
|
salomonfr
Newbie Joined: 07 Jun 2018 Location: RU Status: Offline Points: 8 |
Post Options
Thanks(0)
|
St8kout
Newbie Joined: 17 Jun 2018 Location: Las Vegas, NV Status: Offline Points: 1 |
Post Options
Thanks(0)
|
Hmm, I just updated to 1.6 to get the Microcode CPU protection. Guess I should stay put with this as I don't need 'memory compatibility.'
I was going to suggest you try downgrading to 1.6 as there doesn't seem to be any issues so far. But it looks like they fixed it with the 'c' version. I've learned to keep all BIOS updates on the same USB drive in case I need to go back a version. They all show up when you go to the Flash Update section of BIOS, so you just pick the one you want to install.
Edited by St8kout - 17 Jun 2018 at 8:34am |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |