z370 Raid 0 windows install issues

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello,

i have z370 Taichi and i bought 2x 500Gb Samsung Evo 960. I have installed Raid 0 per manual for PCIE, i can see the logical 1 drive during the windows installation when i installed the drivers, but when i want to choose the drive, i get error, that windows cannot be installed on this drive. I tried to install windows 10 home 64bit.

Have anyone had a similar issues please? Let me know if more details are required.

thank you very much

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
kscltu Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 11 Sep 2018 Status: Offline Points: 3	Post Options Post Reply Quote kscltu Report Post Thanks(0) Quote Reply Topic: z370 Raid 0 windows install issues Posted: 11 Sep 2018 at 5:18am
	Hello, i have z370 Taichi and i bought 2x 500Gb Samsung Evo 960. I have installed Raid 0 per manual for PCIE, i can see the logical 1 drive during the windows installation when i installed the drivers, but when i want to choose the drive, i get error, that windows cannot be installed on this drive. I tried to install windows 10 home 64bit. Have anyone had a similar issues please? Let me know if more details are required. thank you very much

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8937	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 11 Sep 2018 at 11:46am
	Dear Kscltu, Thank you for choosing ASRock. Regarding your case, we have tested at our lab; the Windows 10 can be installed properly. System configuration: CPU: i7-8700k MB: Z370 Taichi BIOS P3.10 SSD: Samsung 960 EVO 250GB x2 (RAID 0) Please follow the steps to setup the RAID volume. 1. Press "F2"or "Del" during POST to get into BIOS. 2. Press "F6" to Advanced mode. 3. Select Advanced, Storage Configuration, and set SATA Mode selection from "AHCI" to "Intel RST Premium With Intel Optane System Acceleration (RAID Mode)" 4. Set Launch Storage OpROM Policy from "Legacy only" to "UEFI only" 5. Set M2_1 "RST Pcie Storage Remapping from "Disabled" to "Enabled" 6. Set M2_2 "RST Pcie Storage Remapping from "Disabled" to "Enabled" 7. Press "F10" to save configuration change and get into BIOS again. 8. Select Advanced, Intel(R) Rapid Storage Technology, Create RAID Volume. 9. Key-in a volume name and press <Enter>, or simply press <Enter> to accept the default name 10. Select your desired RAID Level and press <Enter> 11. Select the hard drives to be included in the RAID array and press <Enter> 12. Select a stripe size for the RAID array and press <Enter> 13. Select Create Volume and press <Enter> to start creating the RAID array 14. Install the Windows 10 at UEFI mode 15. Please download the SATA Floppy Image from below link. And load driver while installing Windows 10. http://www.asrock.com/mb/Intel/Z370%20Taichi/index.asp#Download Thank you! Yours truly, ASRock TSD Edited by ASRock_TSD - 11 Sep 2018 at 11:49am