H110M-HDV R3.0

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Your CPU does have built in Intel 610 HD graphics. Re-install the add-on video card and go into BIOS. On the Chipset Config page you need to change two things: under Primary Graphics Adapter set to Onboard not PCI express.
Under IGPU Multi-Monitor set to to ENABLE. Be sure to Save on Exit. 
Leave the vid card in and move monitor cable to the onboard video connector as the board reboots. The machine may start boot, halt and reboot on its own after you change the BIOS. If you have video then shut down and remove addon video card and check again. 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
badbri Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 20 Feb 2018 Location: USA Status: Offline Points: 415	Post Options Post Reply Quote badbri Report Post Thanks(0) Quote Reply Topic: H110M-HDV R3.0 Posted: 27 May 2019 at 6:23am
	Your CPU does have built in Intel 610 HD graphics. Re-install the add-on video card and go into BIOS. On the Chipset Config page you need to change two things: under Primary Graphics Adapter set to Onboard not PCI express. Under IGPU Multi-Monitor set to to ENABLE. Be sure to Save on Exit. Leave the vid card in and move monitor cable to the onboard video connector as the board reboots. The machine may start boot, halt and reboot on its own after you change the BIOS. If you have video then shut down and remove addon video card and check again.
	https://www.passmark.com/baselines/V9/display.php?id=99573335296

Jpwest Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 23 May 2019 Location: Brasil Status: Offline Points: 4	Post Options Post Reply Quote Jpwest Report Post Thanks(0) Quote Reply Posted: 23 May 2019 at 9:01pm
	Hi RLGL....I do not know. I will check. It is a Intel G4920.

RLGL Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 29 Jul 2018 Location: MN Status: Offline Points: 2025	Post Options Post Reply Quote RLGL Report Post Thanks(0) Quote Reply Posted: 23 May 2019 at 8:58pm
	The cpu has to have on board video.
	Asrock Z370 Gaming K6,Intel i7 8700K, Asrock x570 Taichi

Jpwest Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 23 May 2019 Location: Brasil Status: Offline Points: 4	Post Options Post Reply Quote Jpwest Report Post Thanks(0) Quote Reply Posted: 23 May 2019 at 12:35pm
	Hi everyone. This is my first post. I have a new H110M-HDV R3.0 and I am having a hard time to setup. The problem starts with the video. When I first installed and setup all parts, CPU, memory, HDD, keyboard, I switched on and the system beeped 5 times. I browsed for the information and found out it means, no video card installed. Well, the motherboard comes with integrated video and three port options. To be sure, I installed a video card had and it worked, then I modified the bios to use the integrated video, I tested but the problem persisted. I do not want to use a graphics card, I just want to use with the integrated video. Has anyone had the same problems? Could find any solutions? What solved the problem? Thank you for any help.