RX5700XT stability issues |
Post Reply | Page 12> |
Author | |
ReddishRat
Newbie Joined: 10 Jul 2019 Location: Netherlands Status: Offline Points: 4 |
Post Options
Thanks(0)
Posted: 10 Jul 2019 at 8:20pm |
I've received my new RX5700XT yesterday but I'm running into issues that which makes the card unusable. Hope you have some help or tips.
Current specs: X370 Gaming K4 (bios P5.40) Ryzen 7 3700X 16GB RAM (corsair dominator) I've been using a Vega 64 before and that one runs stable with above specs. To prepare for the new card I first installed the new 19.7.1 drivers. That all went well and the Vega card was running stable. As soon as I inserted the new card, it was recognized by the driver and it installed. Then the issues happened. After a couple of minutes the GFX card switched off/on and the PC froze. After reset, boot loop, then finally back in windows for a few minutes, freeze. So then I used DDU to completely clean the AMD drivers. Landed perfectly in the desktop with the default windows drivers. At that stage also when having a lot of stuff on the screen, same issues as mentioned earlier. Only then I could end up with a BSOD mentioning the pcie-express bus issues which could make sense without drivers. Then I tried installing the new 19.7.1. driver and during install (at 49%) same issues. Also tried resetting the bios, disable secure boot (run with CSM), but no luck. I'm now at a stage that the card is completely unusable for me. At this stage I can think of the following things:
What do you think? |
|
ReddishRat
Newbie Joined: 10 Jul 2019 Location: Netherlands Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Guys, after some researching and tweaking I found the issue. It is a bios issue in the latest asrock bios for AGESA Combo-AM4 1.0.0.1 (to support ryzen 3000). Not sure if it's on all mobos, but at least reported on X370 taichi, gaming K4 en professional.
When using a PCIE4 card and setting the PCIE-express bios setting to AUTO, the bios doesn't properly report to the card it needs to use GEN3. It tries to work with GEN4 resulting into WHEA errors and system freezes. The downside is that I can only make a choice between GEN1 or GEN2 in the PCIE bios settings. Setting it to GEN2 results in a stable PC and running gfx card but limits the bandwith compared to GEN3. I'm going to raise a support ticket so asrock is aware to fix this in the next bios update. |
|
X570 Steel Legend - Ryzen 7 37000X - 16GB 3600 Dominator - RX5700XT - Lot of Corsair iCue bling
|
|
ASRock_TSD
ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8727 |
Post Options
Thanks(0)
|
Dear ReddishRat,
Thank you for posting your query to ASRock forum. Regarding your question, please download the BIOS 5.42 from the link below: https://drive.google.com/open?id=1pQjBCaot40oYKcsWrzY0EPBw05AsFo0l Kindly use instant flash to flash the BIOS. With thanks, ASRock TSD |
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
I just posted this same thing in motherboards forums .. I have your ASRock RX 5700xt on an X470 Master SLI/ac with same issue running 3.30 bios and I have to select Gen 2 to be able to use my pc ..otherwise constant reboots. Any updates for my mobo coming down the pike anytime soon?
|
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
ASRock_TSD
ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8727 |
Post Options
Thanks(0)
|
Dear ThreeDee,
Please contact technical support via the form from following link, they should provide the BIOS more quickly through the support Window. https://event.asrock.com/tsd.asp?ln=en With thanks, ASRock TSD |
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
Done ..
Thanks |
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
hmm, can't edit posts here .. only delete. Anyways, Do you think its an issue with the motherboard not reading the video card correctly or is it an issue with the video card not saying "Hey, you can't run 4.0 so run me at 3.0"? if/then issue with one or the other .. but which one? |
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
New 3.40 BIOS has me running my vidcard at PCIe 3.0 now... fps went up a bit in Hunt:Showdown now from running at PCIe 2.0. (10 fps on average I would say .. maybe more?)
|
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
smithclarkson01
Newbie Joined: 28 Jul 2019 Location: delhi Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Do not use MSI afterburner to monitor, do Not even open it. Also do not use or change any watt man setting. Do not use any FPS , cpu, GPU, temp monitor software for now. They all conflict to the new RDNA architecture. If you want see the FPS, try to use the steam or u play , origin to monitor the FPS.
That is my one week experience with my RX 5700. It?™s running fine now. Do not use any monitor software for now! Do not use any monitor software for now! Do not use any monitor software for now! Important thing repeat three times!! |
|
<a href="https://vlc.vin/">VLC.VIN</a>
|
|
smithclarkson01
Newbie Joined: 28 Jul 2019 Location: delhi Status: Offline Points: 4 |
Post Options
Thanks(0)
|
is that helpful? |
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |