|
Ryzen 3000 series support |
Post Reply 
|
Page <1 1920212223 108> |
| Author | |
Bol 
Newbie 
Joined: 31 Jul 2019 Status: Offline Points: 20 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 17 Aug 2019 at 10:27pm |
|
Cleared cmos, updated to 3.50 in the hope of fix a week later and boot hangs as usual. On the upside, my m2 sata is now visible when I can see a boot screen which ain't very often.
|
|
 |
|
|
exharris
Newbie
Joined: 18 Aug 2019 Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Aug 2019 at 4:51pm |
|
I just updated by B450M Pro4 from 3.40 to 3.60 to apply the AMD fix (to the RDRAND instruction probelm which stops Linux booting), and now cannot get into the BIOS menus, screen just goes blank and nothing happens. Not good.
|
|
|
|
|
pickleslips
Newbie
Joined: 19 Aug 2019 Status: Offline Points: 1 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Aug 2019 at 2:24pm |
|
I've just built up a PC with a Taichi x570 & a 3900x and i'm getting 00 on Dr Debug.
I've reseated the CPU and reset the cmos but no change. Is there anything else I could look at? |
|
|
|
|
wenerikk
Newbie
Joined: 18 Jul 2019 Status: Offline Points: 41 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Aug 2019 at 3:48pm |
Mate, best solution is to return mobo from Asrock and buy from Gygabyte, believe me, I'm sitting here for 1+ month and still have boot issues... |
|
|
|
|
exharris
Newbie
Joined: 18 Aug 2019 Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Aug 2019 at 4:12pm |
|
Managed to get into mine now using Windows 10 recovery menu options
|
|
|
|
|
sc5mu93
Newbie
Joined: 19 Aug 2019 Status: Offline Points: 3 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Aug 2019 at 11:32pm |
I had the same thing with my b450ITX/ac Fatality with 3.50 (latest non-Beta for this board). Stripped it down to nothing, and discovered it was the M.2 drive. I lost the M.2 boot from previous BIOS update to support Ryzen 3K, however I could at least still access it from the OS. With the most recent, I physically had to remove it from the system to access the BIOS. (currently booting from SATA). Luckily, I was able to migrate everything over, prior to this "update" so I didn't lose any data. I could access instant flash, and boot order (m.2 drive not listed) at boot. But F2/DEL lead to black screen with frozen old school cursor bar. Hard reset required. |
|
|
|
|
cykh55
Newbie
Joined: 20 Aug 2019 Location: 91741 Status: Offline Points: 3 |
Post Options
Thanks(0)
Quote Reply
Posted: 20 Aug 2019 at 12:34am |
|
Hi,
I updated my X470 Mobo from 1.4 to 1.9 then to 3.3 per instructions on Asrock website. Before I update the BIOs I also updated the driver packages as instructed. The update was done with Ryzen 3 1200. Windows 10 was loaded and BIOs updated to 3.3. After I switch to Ryzen 5 3600, the computer will not boot to even BIOs options screen, the power is on and off in a loop every 10 seconds. Please help to resolve this issue. Thanks |
|
|
X470 Master SLI/AC
Radeon 580 GPU Ryzen 5 3600 XPG SX8200 M.2 |
|
|
|
|
Daveydguk
Newbie
Joined: 07 Apr 2019 Status: Offline Points: 62 |
Post Options
Thanks(0)
Quote Reply
Posted: 20 Aug 2019 at 3:01am |
|
One thing which happens when I get my PC to eventually boot windows 10 64bit is the adrenalin drivers revert back to 19.7.5 from 19.8.1
B450 itx Fatal1ty, ryzen 3600, sata SSD, sapphire pulse Rx 580 4gb. |
|
|
|
|
Daveydguk
Newbie
Joined: 07 Apr 2019 Status: Offline Points: 62 |
Post Options
Thanks(0)
Quote Reply
Posted: 20 Aug 2019 at 3:02am |
|
On firmware 3.50
|
|
|
|
|
Bol
Newbie
Joined: 31 Jul 2019 Status: Offline Points: 20 |
Post Options
Thanks(0)
Quote Reply
Posted: 20 Aug 2019 at 3:29am |
|
I have exactly the same problem, not getting into a bios screen will mean a scrap motherboard as you won't be able to refresh to a previous bios. Mine did eventually post to a bios screen which I promptly reflashed to 3.30 so I can either sell it or test it with a earlier ryzen cpu. Removed my m2 sata and tried again - no different. Replaced m2 sata with a formatted one and exactly the same. Boot loops, fans speeding up and down no lights on keyboard or mouse. It will sit like this for hours. Spent all day yesterday trying to sort it and on the point of giving up and sending cpu back for rma. I know the board was fine with a 2200g so I have no logical explanation for the crappy behavior.
 . Next step is to try a 200 get in it for testing and to flash my next mobo if I decide to sell.
|
|
|
|
|
Post Reply
|
Page <1 1920212223 108> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
pickleslips wrote: