Ryzen 3000 series support |
Post Reply | Page <1 2324252627 108> |
Author | |
M1th05
Newbie Joined: 23 Aug 2019 Status: Offline Points: 3 |
Post Options
Thanks(0)
|
Can you try another 600w PSU? I think the problem is not the power but compatibility of PSU on the x370... |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 25073 |
Post Options
Thanks(0)
|
That is great to hear topaimz This is one of the major issues with AMD's Ryzen launches, there tend to be a lot of issues with BIOS support out the gate and then when someone encounters any kind of issue at all the first thought is always the BIOS and motherboard. It can often cause issues if we dismiss the possibility it could be something else. I remember when first gen launched a lot of people swarmed the forums complaining about a collection of issues and it turned out Microsoft had broken something with their most recent update that negatively impacted Ryzen. There is nothing wrong with suspecting the BIOS is the issue, but don't rule out other possible causes Edited by Xaltar - 25 Aug 2019 at 4:38am |
|
|
|
topaimz
Newbie Joined: 23 Aug 2019 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
As mentioned previously, the 600W PSU was working perfectly with a 1800x and a 3800x.
Couldn't post when I used my 3900x. I've spent over an hour testing the 3900x with the 800W PSU and haven't run into any issues as of yet. |
|
M1th05
Newbie Joined: 23 Aug 2019 Status: Offline Points: 3 |
Post Options
Thanks(0)
|
Im sorry if i keep insisting, but makes no sense, before posting, 600w are not enought on your setup. I asked you to try a 600w PSU, from another brand, if its possible, as i keep thinking its a BIos issue.... just trying all variables... |
|
tdizzle702
Newbie Joined: 25 Aug 2019 Location: N/A Status: Offline Points: 2 |
Post Options
Thanks(0)
|
Asrock x370 Gaming Profession P5.8 bios unstable starts out good for about a day then the crashes become more and more frequent till it barely boots. 3900x Processor. Downgraded to P5.3 with my 2700x completely stable.
|
|
antonioli
Newbie Joined: 21 Aug 2019 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Does anyone has a solution to high idle voltage with Ryzen 7 3700X or any Ryzen third generation?
I've installed the latest AMD drivers and in idle I get 1.47V with some programs showing as all the cores was in full use except the Ryzen Master that shows them sleeping. When I run a benchmark or everything else the cores become active in Ryzen Master and the voltage reduces to 1.37V. No matter if I uses Ryzen High Performance or Windows High Performance profile, that's what happens. I read that a possible solution is changes the profile to Ryzen Balanced but when I do it all the cores only get close to 3.6GHz no matter if I run multi or single core threads. The voltage in idle decreases to something as 0.93V (with it's good) but when in load only get 1V and it's weird. I tested changing the percentage of minimum processor usage to 90, 85, 5% but what I noticed that the lower the value, the lower will be the maximum clock of all the cores. With 5% it decreases to 2GHz. The maximum percentage is always set to 100%. The same thing happens to Windows Balanced power plan but it gives me only something more than 2GHz per core. Very weird. |
|
CorNut
Newbie Joined: 25 Aug 2019 Location: Eugene, OR Status: Offline Points: 18 |
Post Options
Thanks(0)
|
I have the bootloop issue on 2 systems
the first is a 3800X on the X470 Fatal1ty ITX the second is 3600X on the B450 Fatal1ty ITX Both are upgraded to their latest bios' and neither had problems before upgrading from 1st gen Ryzen CPU's. I'll remove RAM, reset bios, swap to different RAM, just random things until it boots and everything will work fine. I can run memtest with no errors, I can run benchmarks, even reboot the PC to swap in different RAM and it runs great. After that, the problem's when the PC's are shut down for a period of time or they go to sleep due to inactivity. Once that happens, the PC's will bootloop/go through the process yet again, no logo/post, nothing.. They'll turn on then off after 20 seconds or so, then repeat that indefinitely. Sometimes the fans spool up full speed but when that happens it stays that way and won't shut off, but still no post/display. I thought the most recent bios' were my answer. I have better luck with the 3800X on the X470 board, it uses an HDPLEX 400W PSU and it has an RTX 2070. That doesn't bode well for it being a PSU issue since the 3600X has a larger PSU with less power hungry parts. |
|
EricM80
Newbie Joined: 25 Aug 2019 Status: Offline Points: 16 |
Post Options
Thanks(0)
|
Does ASRock even monitor those forums? Anyway here's my contribution to the B450 bootloop issue:
B450 Gatal1ty ITX, R1700 (always works fine) and R3900X (lots of issues) Using an old GeForce GT730 for display, making PSU wattage a non issue. RAM 2x Crucial Ballistix Sport LT 3200 16GB . MoBo came with BIOS 3.20, used the R1700 to update to 3.50 . R3900 has been bootlooping with the following PSUs -Dell 350W -Seasonic SS500HT (pre-80+) -Antec EarthWatts 380 80+ -Seasonic SS-300FTX 80+ Bronze (got the BIOS screen ONE time out of 20 with this one) System appears almost stable with -FSP Aurum AS-400 80+ Gold |
|
Ray62
Groupie Joined: 01 Jul 2018 Location: Germany, Berlin Status: Offline Points: 706 |
Post Options
Thanks(0)
|
If Windows 10, disable fast startup on shutdown.
And i think the sleeping/power save modes are buggy this time. Disable Suspend To RAM and deep sleep in the bios. Newer bios versions after AGESA Combo-AM4 1.0.0.3 ABB are outstanding. |
|
Asrock Fatal1ty X370 Professional Gaming Offline
Under test: MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE |
|
EricM80
Newbie Joined: 25 Aug 2019 Status: Offline Points: 16 |
Post Options
Thanks(0)
|
Forgot to mention, needless to say, all the above PSUs work fine in my X570 Taichi with the same R3900. I can even replace the GT730 with a Radeon 7700 and add an Aquantia 10GB NIC.
|
|
Post Reply | Page <1 2324252627 108> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |