Ryzen 3000 series support

Xaltar wrote: I got my 3600 up and running on my X370 Taichi without any issues, my RAM however has never given me any issues from first gen to now though so your mileage may vary. Annoyingly, I never have the same issues other people do, when I am trying to help people figure it out that is actually a bad thing... My x570 Taichi is still being put through it's paces, so far aside from some memory training on cold boot it's running smoothly. I will be doing a user review comparing it to my other AM4 boards soon, detailing my experience with them all and Ryzen 3000.

yes ram will be something i'll be looking deeply into as well as the fclk possibilities of course, hopefully i can help shed some help/light regarding setup
now if i can get as much luck with the 3000 series as i got with 1000 ryzens i dont know yet
and as with first gen i presume maybe a few things we learn at early stage may well 'change' later on with bios updates etc

what sort of luck are you having at the moment with your ram in both the 370 and 570 systems ?

i meant what is the state with your x370 and 3600cpu now ?

ive got the 3866 tridentz which i got 3466 on the ryzen 1700 but that had an excelent memory controller i was hitting 3200cl14 from bios version 2.0 with trident cl15 rams at first before i bought the 3866 kit

im hopng to be able to get decent 3600/3733 on the 3800x so i can try and help /assist others to get stable 3600mhz rams

ITS ALIVE !

x370 taichi - 3800x - 3600mhz ram @cl16

what a bl00dy afternoon i had !
including but not limited to ...............

asrock website going all wrecked and not letting me get to bios page
bios 3.3 knocking out my usb ports .....try flashing without usb ports
AND YES internet bios flash broken as well..no updated bios available.... really nothing newer than 3.1 ? LOL
and then to top it all .ram slot b2 working with the 1700 and bios 5,8 but causing a no boot with the 3800x...total prevention to boot past led codes 33-7a-36-SWITCH-OFF!..........that was a nightmare in itself

ANYWAYS now got both slots a2/b2 to work
quick cinebench results in R20
multi core 4970
single core 515

hwinfo reports at some stage i cannot witness cpu hits 4525mhz on core 0 and core 1
but i can see it hold 4475mhz for a second or two running cinebench
cpu is 100% out the box settings wise at the moment as i lost soooo much time with this silly ram slot issue today

Exel wrote: Got my HyperX 3200MHz CL16 memory running fine with Ryzen 3600 and X470 Taichi using XMP settings. Managed even to tighten the timings to CL15 without issues. The memory kit is listed in Taichi's QVL. That said, the cpu doesn't boost to its 4.2 GHz max clock despite temps being well under control. The closest it has gotten with the 3.60 BIOS is 4.15 GHz, but mostly it tops (briefly) at 4.1 GHz. Other than that I haven't had compatibility issues with the X470 Taichi.

maybe because im using the early 7/7/19 driver for chipset before the destiny nerf and the voltage panic nerf

Last post from me too regarding my B450 gaming itx/ac.
I too gave up and purchased another motherboard. Unlike the previous poster I purchased a rival B450 gaming itx board that after a simple bios update booted perfectly into Windows on the first try with my 3600 installed.

Mine was outside the return window, having used it successfully with a 2200g installed for 8 months. It's now going on eBay with the caveat not to use it with a 3rd gen ryzen cpu. I will get most of my money back, what I won't get back is the month of frustrating time wasted trying to get this to run.
As echoed in this thread previously, other mobo manufacturers can run ryzen 3000 cpu in their board with a simple update, asrock apparently can not.
So for folks who come here for advice and help about the B450 gaming itx, mine is quite simple:
Buy another board.
I won't name the rival manufacturer because I don't think it's right to do so on an official asrock forum.
But a shout to xaltar for his unflinching support and
suggestions, in my case I was flogging a dead horse.