Ryzen 3000 series support

Hi, I just checked my ram and it says version 4.32. Not sure what I should look for in terms of what chips.

I am getting these random BSOD on my ab350 pro4 board even with new p6.25 bios. I suspect it has to do with my memory as well. I have tried Auto, 2933, 2600, XMP. I was hoping the bios update would resolve but it didn't. Going to try to do some memory swaps later this weekend to try to pinpoint problem.


My Setup:
Board: ASRock AB350 Pro4
Bus Clock: 100 megahertz
UEFI: American Megatrends Inc. P6.25 11/09/2019

Windows 10 (x64) Version 1909 (build 18363.476)
Install Language: English (United States)
System Locale: English (United States)
Installed: 8/5/2019 4:19:38 PM
Servicing Branch: Current Branch (CB)
Boot Mode: UEFI with Secure Boot disabled

3.60 gigahertz AMD Ryzen 5 3600 6-Core
384 kilobyte primary memory cache
3072 kilobyte secondary memory cache
32768 kilobyte tertiary memory cache
64-bit ready
Multi-core (6 total)
Hyper-threaded (12 total)

HITACHI HUS724040ALE640 [Hard drive] (4000.79 GB) -- drive 1, s/n XXXXXXXX, rev MJAONS04, SMART Status: Healthy
Sabrent [Hard drive] (1024.20 GB) -- drive 2, s/n XXXXXXXXXXXXX.
SanDisk Ultra USB Device (30.75 GB) -- drive 3, s/n XXXXXXXXXXXXXXXX
ST1000DM003-1ER162 [Hard drive] (1000.20 GB) -- drive 0, s/n XXXXXXXXXX, rev HP51, SMART Status: Healthy

16316 Megabytes Usable Installed Memory
G.SKILL Flare X (for AMD) 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Desktop Memory Model F4-3200C16D-16GFX

Slot 'DIMM 0' is Empty
Slot 'DIMM 1' has 8192 MB
Slot 'DIMM 0' is Empty
Slot 'DIMM 1' has 8192 MB

Radeon(TM) RX 460 Graphics [Display adapter]
LG FULL HD [Monitor] (21.7"vis, January 2014)

That's fine.

I haven't had to deal with hardware trouble in so long. (My previous build dates back to 2012) If there's any test or anything I can provide results with, please let me know.

Ray62 wrote: Guys, just using XMP profile very often is not working. At least the DRAM voltage has to be increased a bit (1.4V max) for 3200 speed. In other cases only manual setting of timings will help (-> Greetings from Ryzen DRAM Calculator). With Matisse, the situation is better, but still far away from "plug and play". And it seems that some newer boards and/or bios versions increase the DRAM voltage at default, when using 3200MHz or more. For example: My X570 board sets 1.38..1.39V for XMP3200, if DRAM voltage is set to AUTO. And when i increase DRAM frequency, voltage will be a bit higher like 1.42V on AUTO.

Thanks, I'll be looking into this. But beyond the basic, I'm really intimidated by all the setting options I see in the bios and not sure what is safe to change and what isn't.

Googled Ryzen DRAM calculator and it and it only mentions Zen and Zen+ support?

Thanks, will look into this when I have some free time. In the meanwhile, I just installed the AMD chipset drivers (never knew that was a thing) and set my pc to AMD Ryzen balanced power mode and seeing how that goes.

So far so good and back on XMP 3200 settings.

But haven't got much time yet on my pc. Will see.