Windows 10 support info

Tengo una build compuesta por ASRock A320m-hdv Ryzen 2400g. La Bios es P5.50.
Reinstale window 10 y me da un error. No toma Sonido. Sólo reproduce a través del HDMI pero co detecta las salidas traseras ni posteriores. Eh actualizado todo el windows y todos los Drivers pero tampoco aparece en Divice Component. Es como si no existieran. Necesito ayuda con respecto a este problema ya que funcionaba bien hasta que actualice Bios. Recalco que en Bios dice
Audio integrado- enable
                  HD activado
Pero en el sistrma no aparece. Y si los agrego como drivers heredados me da error de windows con pantalla azul y reestablece a todo el windows. Necesito que me ayuden a configurar la bios si es que es nesesario. Gracias

I just had Comcast install a Gigabit service to my home. I have 2 AsRock B450M Steel Legend builds.

I am unable to get more than 490Mbps (speedtest.xfinity.com 112Mbps on speedtest.net) on either board using multiple Cat6 cables (varies manufactures) even if it is the only device plug directly into the Gigabit Modem.

I have an HP Omen 15, Dell Latitude E7270, and a MacBook Air, that all, when wired, get the Gigabit Speeds 880-1280Mbps on both speedtest.xfinity.com and speedtest.net. Also have an iPhone 10Xs that gets into the 600-700Mbps on the wireless network. So, it being a configuration issue on Comcast's side is pretty unlikely at this point. But to confirm this I had Comcast do further diagnostics and everything seems to be running very well on their end.

In my testing ??

I have reset the Network through Windows 10 Settings and have only reconnected to the onboard LAN using DHCP straight to the Modem and then Static using different Cat6 cables. Same results.

I have upgraded the onboard Realtek Gigabit LAN drivers, first from AsRock, and then straight from Realtek. Same results.

Thinking it was a Service issue ??Though one machine is Windows 10 machine and the other is Windows Server 2016 (running only Hyper-V) ??I have attempted to boot into Safe Mode with Networking. Same results directly plugged into the modem using cables that tested at 1 Gig on the three laptops.

I have attempted to use different DNS servers, very little difference in any.

I have ran Ubuntu Live on the same PC and get 1.1Gbps downloads and the same 40-50Mbps upload speeds. (Suggests a Window's Issue)

I have installed an Ubuntu Desktop on the other machine as a VM and get 1.2Gbps on that. (Suggest a Window's OS Throttling issue) But I also have installed Windows 10 Pro on a VM and get the similar results as the Ubuntu.

Testing further through all my VMs, the Windows Server 2019 VMs have the same results as the host, limited speeds to 400-500Mbps.

The biggest difference I can tell in the host and VM?™s compared to the Window 10 Pro OS VM in testing the is that this version of windows is the 1809 while the rest have been updated to the 1903 base version, or whatever the Server Versions equivale to.

So, the issue is ether Windows settings or with the Windows Drivers and MOBO combination with the May Updates conflicts is my thinking. I might be way off on this thought process though.

Any help or suggestion are welcome. Brainstorming and troubleshooting this issue is starting to burn me out.

None of the un-installing helped. I dug into the network properties and found that my receive and transmit buffers maximums were low compared to my other device that is working with gigabit speeds.

Receive Buffers: 512 (Max)
Transmit Buffers 128 (Max)

I suspect it is primarily just that this is a lower quality NIC, and the advertised gigabit speeds do not have the technical capabilities to backup the marketing. Just a suspicion though.

Hi -

I have a PC with the A75M board and have been struggling to update it to Windows 10. I've progressed from trying the free upgrade, which failed for undefined reasons, purchased Win 10 on disk and tried to upgrade it that way, which failed, and finally tried to do a clean install by booting off the Win 10 disk and overwriting the C: drive. Fail, fail, fail.

So now I'm wondering: is it even possible to run Win 10 on the A75M or is it now a boat anchor (since Win7 support has ended)?

Thanks!
Chris

Thanks for the response. So you?™re saying that the install should work with the mobo but my installation method won?™t. If I follow your instructions I should be golden, right? Thanks!