|
Ryzen 3000 series support |
Post Reply 
|
Page <1 9192939495 108> |
| Author | |
nebidaan 
Newbie 
Joined: 07 Feb 2020 Location: Hungary Status: Offline Points: 5 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 07 Feb 2020 at 5:27pm |
|
Hey Everyone!
I would need some help/clarification with regards to updating the BIOS to 3.90 on my Taichi x470. So here are my hardware/software/driver specs: MB: Taichi X470, current BIOS: 3.60 CPU: Ryzen 5 3600 Memory: Corsair Dominator Platinum 32GB (2x16) CMD32GX4M2C3600C16 VGA: ASUS Radeon R9 270x TOP DirectCU (latest 20.2.1 driver installed) OS: Win10 Pro fully activated, up-to-date (1909, OS build: 18363.628) Installed x470 Chipset driver: 2.01.15.2138 (latest), downloaded directly from AMD's website So my question is: do I really need to install that outdated all-in-one driver (that is mentioned in the bios installation instructions section) prior to starting the actual BIOS update process with instant flash? I am a bit confused here, as my PC is absolutely up-to-date with the latest drivers/updates fully installed. (Also, in my device manager there are no yellow marks/errors/problems, everything is fine and up and running.) Thank you for your suggestions/help in advance! |
|
 |
|
|
DragonQ
Newbie
Joined: 23 Nov 2019 Status: Offline Points: 12 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Feb 2020 at 12:11am |
If you have the latest chipset drivers just flash it. |
|
|
|
|
ViCe
Newbie
Joined: 08 Oct 2019 Location: Russia Status: Offline Points: 34 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Feb 2020 at 1:17am |
|
Don't do that. Yesterday I installed update and what's now:
1) Motherboard can't load with xmp profile, even though my ram supports xmp 2) sometimes clocks are lower then them were before (it's no throttling, I use ekwb liquid cooling solution) 3) something wrong with pbo and p-state - my 3700x can't work on low clocks |
|
|
|
|
John29
Newbie
Joined: 31 May 2019 Location: uk Status: Offline Points: 90 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Feb 2020 at 4:33pm |
|
X470 Taichi 3.90 is now available on the ASRock website Just install Bios 390 AGESA 1004B ,sofar all good ASROCK X470 Taichi bios 3.90 Ryzen 3700X AMD Ryzen 7 3700X All core at 4200 Noctua NH-U12A Nvidia 1060 6gb Samsung 970 Pro M.2 Samsung 860 EVO M.2 TeamGroup Dark Pro "8Pack Edition" 4x8 32GB PC4-25600C14 3200 running at 3600 at 1.380 Seasonic 750 Platinuim |
|
|
|
|
gizmic
Groupie 
Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Feb 2020 at 7:31pm |
|
it works fine till you power down the system
|
|
|
|
|
|
|
John29
Newbie
Joined: 31 May 2019 Location: uk Status: Offline Points: 90 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Feb 2020 at 8:18pm |
|
I have no problems, everything is fine and running well
Bios L3.77 was good,Bios L3.78 was good until i restart and lost all setting. |
|
|
|
|
ViCe
Newbie
Joined: 08 Oct 2019 Location: Russia Status: Offline Points: 34 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 Feb 2020 at 2:08am |
Turn off your system and try to boot. Result will be so disappointing. |
|
|
|
|
ViCe
Newbie
Joined: 08 Oct 2019 Location: Russia Status: Offline Points: 34 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 Feb 2020 at 2:16am |
Same sh*t. I think there's some problem with keeping changes in BIOS, same issue was on z97 Mobo, I had extreme 4 once, and I tried to boot after update, it turned off (kinda specific way to flash rom), and went to boot loop, to restore BIOS it was only one way - clear CMOS and went down to privious BIOS |
|
|
|
|
gizmic
Groupie
Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 Feb 2020 at 3:05am |
|
as mentioned before all systems running 1004B will have this bug
|
|
|
|
|
|
|
|
nebidaan
Newbie
Joined: 07 Feb 2020 Location: Hungary Status: Offline Points: 5 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 Feb 2020 at 3:28am |
|
Having read your replies, I think I'll just stick to 3.60 for now. Currently my system is rock stable, no stability/boot/temperature/BSoD issues (never had in fact since I put together this build).
That power on problem sounds quite annoying, especially considering I tend to turn off my PC completely at the end of the day then cold boot every morning. |
|
|
|
|
Post Reply
|
Page <1 9192939495 108> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
nebidaan wrote: