AM4 BIOS info |
Post Reply | Page <1 34567 16> |
Author | |
BerndGaykema
Newbie Joined: 10 Nov 2019 Location: Netherlands Status: Offline Points: 124 |
Post Options
Thanks(0)
|
Board: X570 Creator
BIOS: Both 3.14 beta and 3.15 beta CPU: AMD Ryzen 7 3800X RAM: 32GB, 2 x 16GB Corsair Vengeance LPX CMK32GX4M in slots A2 and B2 Issue: Boot loop when XMP-settings are applied, on AUTO it works OK (but much slower than possible). Versions 3.0 and earlier where OK, XMP-settings could be applied. |
|
X570 Creator, Ryzen 7 3800X, Corsair Vengeance LPX 2x16GB 3200 CMK32GX4M, Kingston NVMe A2000 500GB (OS), 1000GB (Data).
|
|
BerndGaykema
Newbie Joined: 10 Nov 2019 Location: Netherlands Status: Offline Points: 124 |
Post Options
Thanks(0)
|
Board: X570 Creator
BIOS: 3.30 beta CPU: AMD Ryzen 7 3800X RAM: 32GB, 2 x 16GB Corsair Vengeance LPX CMK32GX4M in slots A2 and B2 Issue: Boot loop when XMP-settings are applied, on AUTO it works OK (but much slower than possible). Versions 3.0 and earlier where OK, XMP-settings could be applied. |
|
X570 Creator, Ryzen 7 3800X, Corsair Vengeance LPX 2x16GB 3200 CMK32GX4M, Kingston NVMe A2000 500GB (OS), 1000GB (Data).
|
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
Board: X570 Taichi
BIOS: 3.80 beta CPU: AMD Ryzen 7 3700X RAM: 32GB, 2 x 16GB HyperX Predators 3200@3600 CAS 16 Issue: None through preliminary testing so far |
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
Manp
Newbie Joined: 24 Oct 2020 Status: Offline Points: 18 |
Post Options
Thanks(0)
|
Board model: B550 Phantom Gaming-ITX/ax
BIOS version: 1.50 1.60 1.61 1.71 (all AGESA 1.1.0.0 based) CPU: Ryzen 5 3600x RAM: Corsair Vengeance RGB Pro 16GB (2x8GB) @ XMP 3600 C18 or Crucial Ballistix BL2K8G36C16U4WL RGB @ XMP 3600 CL16CL16 Notes: tons of WHEA errors logged. System randomly reboots under light load or high load. Both memory kits runs fine with zero WHEA errors on a Gigabyte x570 AORUS Elite MB with every AGESA 1.1.0.0 based BIOSes (beta and non beta) Board model: B550 Phantom Gaming-ITX/ax BIOS version: 1.20 (AGESA 1.0.8.0 based) CPU: Ryzen 5 3600x RAM: Corsair Vengeance RGB Pro 16GB (2x8GB) @ XMP 3600 C18 or Crucial Ballistix BL2K8G36C16U4WL RGB @ XMP 3600 CL16 Notes: Sytem is perfectly stable. BIOS seems to automatically apply an overvolt to SOC @ 1,2 volts when XMP is enabled. I can manually set VSOC to 1.1 volts with no loss of stability. i see a huge regression here. |
|
BerndGaykema
Newbie Joined: 10 Nov 2019 Location: Netherlands Status: Offline Points: 124 |
Post Options
Thanks(0)
|
I notice that the affected BIOS versions are smaller than the last good working: 13.9MB against 16.9MB. Is some data not implemented for non-5000 Ryzen CPU's?
|
|
X570 Creator, Ryzen 7 3800X, Corsair Vengeance LPX 2x16GB 3200 CMK32GX4M, Kingston NVMe A2000 500GB (OS), 1000GB (Data).
|
|
Animeleptic
Newbie Joined: 09 Jan 2020 Status: Offline Points: 27 |
Post Options
Thanks(0)
|
Mobo: X570 Aqua
CPU: 3950x RAM: 4 x 8GB G,Skill Trident Z Royal F4-3600C14Q-32GTRSB BIOS: Beta 3.30 Was able to transfer over same custom timing config from Beta 1.71 without compromise 14-15-12-26-38-1T @3800 / 1900 FLCK / 1.47v (with customer sub timings also) No longer have to force FLCK 1800 @ 3600 for Ram native spec. P-STATE has drastically been improved, and no need to enter a manual core voltage offset to compensate when OCing. Auto vcore offset has improved. PBO Enabled performance on 3950x Auto settings has improved with better voltage regulation. When entering BIOS CPU voltage (when in auto) is reduced resulting in lower CPU temps |
|
gizmic
Groupie Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
|
Board model: X470 Taichi Ultimate
BIOS version: 4.60 CPU: 3950X RAM: G.Skill F4-4000C18-8GTZR (8GBX2) @ 3600 CL 14 Notes: made some quick test if i could hit 3733 cl 14 seems no go for me from what i can tell the all core idle is averaging 4.3-4.4 instead of the usual 4.2-4.3 i've yet to test the bug introduced on 4.20 which requires me to manually set SOC to 1.1 in order to play videos smoothly. |
|
|
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
Had some random reboots when under full load. Went back to XMP 3200 RAM timings with PBO on and seemed stable. I replaced the 3700x with a 3800XT and 3600 on RAM, Infinity Fabric 1800 was a complete no-go .. reverted back to the 3.40 BIOS and 3600 RAM,IF 1800 booted and has been stable so far encoding videos and playing Hunt:Showdown. |
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
Animeleptic
Newbie Joined: 09 Jan 2020 Status: Offline Points: 27 |
Post Options
Thanks(0)
|
CPU: 3950x
RAM: 4 x 8GB G,Skill Trident Z Royal F4-3600C14Q-32GTRSB BIOS: Beta 3.30 Follow up from previous post. Ran into game crashes in COD MWF which was not an issue on the previous beta 1.71 settings. Apparently I had to up the CLDO VDDG CCD/IOD voltage by entering 1.0v from 0.950v to eliminate the in game crashes. If CCD and IOD is on auto it works perfectly fine also just at the cost of more voltage running at 1.1v with a negative offset.
|
|
Manp
Newbie Joined: 24 Oct 2020 Status: Offline Points: 18 |
Post Options
Thanks(0)
|
just to report that version 1.80 (AGESA 1.1.0.0 patch C) has been rock solid for me so far. it even allows to run SOC manually @ 1,1 volts with XMP @ 3600 enabled just like version 1.20 did. happy about it so far. |
|
Post Reply | Page <1 34567 16> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |