|
RGB Utility issues and workaround |
Post Reply 
|
Page <1 678910> |
| Author | |
Sergentpm 
Newbie 
Joined: 11 Feb 2021 Location: Canada Status: Offline Points: 8 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 11 Feb 2021 at 5:01pm |
|
Try the new beta version 2.0.93
https://www.asrock.com/mb/Intel/B460%20Steel%20Legend/index.asp#Download Flash firmware as described in the post (administrator). |
|
 |
|
|
Sergentpm
Newbie
Joined: 11 Feb 2021 Location: Canada Status: Offline Points: 8 |
Post Options
Thanks(1)
Quote Reply
Posted: 11 Feb 2021 at 5:06pm |
|
Try the new beta 2.0.93
http://www.asrock.com/mb/AMD/B450%20Steel%20Legend/#Download Flash firmware |
|
|
|
|
svista
Newbie
Joined: 11 Feb 2021 Status: Offline Points: 4 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 Feb 2021 at 3:50pm |
|
Ok but I don´t know how to flash it when I flash it as described above in this forum it says fail maybe i use wrong wICPFLASHADSBv2.exe /File-nu
I don´t know the end nuber of this command. Can you help me? |
|
|
|
|
Sergentpm
Newbie
Joined: 11 Feb 2021 Location: Canada Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 Feb 2021 at 4:17pm |
|
Just tap "dir" command it will show you files names. Use the command wicpflashadsbv2.exe /file=nu51_3.xx
Open your command prompt as administrator |
|
|
|
|
svista
Newbie
Joined: 11 Feb 2021 Status: Offline Points: 4 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 Feb 2021 at 5:48pm |
|
It still dont show me the nuber
look at this https://ctrlv.cz/Hztp its my command prompt |
|
|
|
|
Sergentpm
Newbie
Joined: 11 Feb 2021 Location: Canada Status: Offline Points: 8 |
Post Options
Thanks(1)
Quote Reply
Posted: 12 Feb 2021 at 7:09pm |
|
File #12 nu51_3.04
|
|
|
|
|
svista
Newbie
Joined: 11 Feb 2021 Status: Offline Points: 4 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 Feb 2021 at 7:28pm |
|
OK thanks but it still doesnt work when I ran the commant it inicialize it but then it repeats something 10 times and then it says ICP fail and yes I run it as administrator.
|
|
|
|
|
Sergentpm
Newbie
Joined: 11 Feb 2021 Location: Canada Status: Offline Points: 8 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 Feb 2021 at 7:50pm |
Do you bios is up-to-date? |
|
|
|
|
DimazDimo
Newbie
Joined: 25 Mar 2021 Location: Indonesia Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 25 Mar 2021 at 8:46pm |
|
Hello Guys
my problem now after i updated polychrome to v2.0.99 and razer synapse 3.6.331.31613, everytime i want to edit Asrock Part, its nothing happen n turn off 1. Polychrome RGB can edit onboard rgb, 2. i tried re-flash it, re-install both apps, and finaly i reset my windows 3 times , i tried install razer synapse and polychrome 2.0.61 (from cd), i installed Polychrome 2.0.93 (my last polychrome before update to 2.0.99), and i installed 2.0.96.. and still nothing change. 3. my curious, everytime i edited add effect and color and save, nothing happen and the light turnoff, when i reopen my synapse, the Asrock Part i choose any effect and color before, its always turn like that, the COLOR part turn invisible (No Color). i think there is something problem with coding or anything. it can't response to synapse.. now i feel hopeless and disappointed, because i tried everything i know from web, forum and youtube, nothing happen.. |
|
|
|
|
Flamz
Newbie
Joined: 29 Jun 2021 Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jun 2021 at 5:50am |
|
Incase anyone comes looking for a solution in 2021 here it is. I made this reply for all you guys so you don't have to go looking for hours as I did.
I ordered a prebuilt PC from CyberPowerPC and the ASROCK b550 Am Gaming Motherboard drivers/utilities will not be found anywhere on the internet as it is a custom build for the CYBERPOWERPC brand. So ASRGBLED software was not working for me. Got an error that wouldn't let me open it. I have a AMD version so make sure you go to the CYBERPOWERPC website and find the archive that stores the latest drivers. It's the most sketchy website but I talked to Tech Support and they confirmed it is legit. Here is the direct link for my motherboard(ASROCK B550AM GAMING): http://www.cyberpowerinc.com/drivers/?dir=Motherboards/MB-478-101%20B550AM%20GAMING/Driver . Anyways, based on your motherboard, download the specific ASRGBLED software they have listed. And follow the same steps as the original poster outlined. The nu51_### file will be different for everyone based on the BIOS and motherboard so go and find yours. Just follow the same steps and it works. Restart the PC a couple of times after to make sure it works. For anyone still stuck, uninstall your original ASRGBLED software and install the latest one before following the steps of the original post. If it still doesn't work, make sure your addressable RGB pin is connected properly. Mine was loose so the original fix didn't work for me as the PC didn't recognize any of the fans plugged in. Resolve hardware issue before doing the software fix. Keep uninstalling and installing until it works. Its a bit annoying but it works for me now. I spent the entire day to figure out a fix for this issue. Hope this saves you the time. Feel free to email me if you need more help. |
|
|
|
|
Post Reply
|
Page <1 678910> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
svista wrote: