|
H510 PRO BTC+ |
Post Reply 
|
Page <12345 13> |
| Author | |
Rankl 
Newbie 
Joined: 22 Aug 2021 Status: Offline Points: 45 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 22 Aug 2021 at 2:18am |
|
i don´t get it to run at all.
CPU and RAM are from the compability list, but i dont get into the BIOS. Any advice what could be wrong? |
|
 |
|
|
usafmike76
Newbie
Joined: 13 Jul 2021 Status: Offline Points: 270 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 Aug 2021 at 4:03am |
|
What happens when you power on? Did you try to run without an OS and see if you can get to bios?
|
|
|
|
|
Rankl
Newbie
Joined: 22 Aug 2021 Status: Offline Points: 45 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 Aug 2021 at 4:58am |
|
The CPU fan is running and also the gpu is lighting up and the fan running.
Thats all. No clue. Did un/re plug all components |
|
|
|
|
Rankl
Newbie
Joined: 22 Aug 2021 Status: Offline Points: 45 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 Aug 2021 at 5:00am |
|
I don´t have an os installed. The issue is from the beginning. Still didnt get it to run
|
|
|
|
|
Talkwrench
Newbie
Joined: 22 Aug 2021 Location: UK Status: Offline Points: 30 |
Post Options
Thanks(0)
Quote Reply
Posted: 24 Aug 2021 at 9:23pm |
|
Well after many days of trying everything. I finally got this working! I can't believe how stupid I was lol. Once I put power on the PCIE power headers on the motherboard it worked. It seems the MB can run 2 cards without any additional power on the PCIE sockets. Anyway, I hope that helps someone.
|
|
|
|
|
Monty
Newbie
Joined: 26 Aug 2021 Location: UK Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 26 Aug 2021 at 8:00am |
|
Thanks for the tips. I am just setting my board up.
2060 super in slot 1 works fine. 3060 in slot 2 is not recognised. If I want to add gpu in slots 3 to 6 unclear about what cable to use from psu to motherboard pci connection. The motherboard has molex connectors which it says to connect to pcie power. Corsair psu s come with 4 pin molex connectors which plug into the 6 pin serial/sata ports on the power supply. Is that where you connect the molex ones to ? Or what cable does one need ? As I don't know of a cable with 4 pin molex at one end and 8 pin pcie at psu end ?? |
|
|
|
|
ASRock_TSD
ASRock_Official 
Joined: 20 Mar 2015 Status: Offline Points: 8727 |
Post Options
Thanks(1)
Quote Reply
Posted: 27 Aug 2021 at 5:34pm |
|
Hi All,
The following shows how we config a mining rig with H510 Pro BTC+, for your reference. https://www.asrock.com/support/faq.asp?id=503 All the best ASRock TSD |
|
|
|
|
Fullcount
Newbie
Joined: 27 Aug 2021 Location: Netherlands Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 Aug 2021 at 5:44pm |
|
Hey all.
I've build a wooden stand with 2 power supplies to fit this board. I've had it running after some troubles and installed windows. After some idling the pc shutdown on its own and will not start whatsoever anymore. Both my power supplies make a clicking noise but not in sync. I'm suspecting that the power supplies aren't being controlled in sync and that may have caused problems or even damage, since the motherboard doesn't turn on anymore. Anyone run into the same kind of problems? |
|
|
|
|
society
Newbie
Joined: 29 Aug 2021 Location: USA Status: Offline Points: 90 |
Post Options
Thanks(0)
Quote Reply
Posted: 29 Aug 2021 at 4:31am |
Thank you, but to be more specific.... Your image says power (PSU1) from USB riser cards? Do you mean that we cannot use the PCIE slots for GPUS in PCIE1 & PCIE2 ? We must use riser cards for slot 1 & 2 if we use more than one PSU? Thank you. |
|
|
H510 Pro BTC+
|
|
|
|
|
Justin_R
Newbie
Joined: 30 Aug 2021 Status: Offline Points: 65 |
Post Options
Thanks(0)
Quote Reply
Posted: 31 Aug 2021 at 12:50pm |
|
I read that diagram as saying that if you are running a card from the Mining Port, that would be on a riser and powered by PSU1.
|
|
|
|
|
Post Reply
|
Page <12345 13> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
ASRock_TSD wrote: