H510 PRO BTC+

AVylkov wrote: Hi Kenzo, as far as I understood you are an expert with this mobo. I need some help to connect 2 GPUs . My system is : CPU - intel i3 10105f without integrated video RAM - kingston fury beast PSU - Corsair rm750x I have issue when connect the second GPU - the system goes to sleep and it does not load windows. Just the first PCI slot is working. Do you know how to solve this ?

Hi AVylkov, can I ask how your system operates when you have 1 GPU installed?
My MOBO doesn't recognise any GPUs in any slots and I'm wondering if the board is dead on arrival (seen on other posts this can happen).

Hey mate!
I just went and tried that by unplugging GPU #2 and running the HDMI off GPU #1, but the GPU LED indicator stayed red and I got the CPU/GPU 5 beep error. If I restart the system using the MOBO HDMI the 5 beep goes away and the board displays slot 1 as red on the MOBO screen on startup.
I'm finding it super difficult to find any information on the LEDs or MOBO screen displays slots as red. Can you check if yours is green when you turn it on with 1 GPU?

Sasha37 wrote: What a sad example of good idea lost in undeveloped details. This board indeed could be fantastic, but for now only problems. For example - why do we need to have HDMI plugged in at all to boot it? Could this stupid engineers figure out that most of the rigs don't have dedicated monitors attached? It is supposed to professional BTC board, right?

How're you going to set up your bios and OS without a screen?
I've got monitors for setup and a Raspberry Pi screen for monitoring down the track.

Do you know anything about the problems we've been having above? I'd love for some help!

Bobberetic wrote: Sasha37 wrote: What a sad example of good idea lost in undeveloped details. This board indeed could be fantastic, but for now only problems. For example - why do we need to have HDMI plugged in at all to boot it? Could this stupid engineers figure out that most of the rigs don't have dedicated monitors attached? It is supposed to professional BTC board, right? How're you going to set up your bios and OS without a screen? I've got monitors for setup and a Raspberry Pi screen for monitoring down the track. Do you know anything about the problems we've been having above? I'd love for some help!

Good for you, you have everything. Enjoy it.
As for me - I don't use monitors after the rig is launched and working, why waste a nice Strawberry PI?

I read them all but no solution :'(

But I did find my own solution!!

Switched Boot Graphics from Auto to Integrated only, and then switched all PCI link speeds to Gen 3 instead of Auto.
For whatever reason that worked fine.

Also, I have no idea what else to do with my Pi so I figured a little screen would be cute :3