|
H510 PRO BTC+ |
Post Reply 
|
Page <1 910111213> |
| Author | |
Jelon 
Newbie 
Joined: 10 Nov 2021 Status: Offline Points: 75 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 10 Nov 2021 at 4:00pm |
Thanks for the tip. I didn't even checked that CPU has integrated graphics... Yes, it boots without a GPU. I can enter BIOS. Can it be a problem with PCIe slot itself in that case? I will check GPU again but it worked just fine few days ago and I tried 3 different ones and same effect. |
|
 |
|
|
Sasha37
Newbie
Joined: 23 Oct 2021 Location: Canada Status: Offline Points: 135 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Nov 2021 at 4:02pm |
|
most likely power issue, but check gpu elsewhere
|
|
|
|
|
virgil
Newbie
Joined: 10 Nov 2021 Status: Offline Points: 30 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Nov 2021 at 6:12pm |
|
Hey guys I have recenlty bought this mobo and can't even get to the bios setup.I was lucky to get the 3 beeps once but that was the last thing i got. I changed my dimm 6 times also bought new ones but nothing changed. I am running it as simple as it gets and also wiped the bios but nothing changed. Any tips?
Thanks. |
|
|
|
|
Jelon
Newbie
Joined: 10 Nov 2021 Status: Offline Points: 75 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Nov 2021 at 6:39pm |
Changed the PSU and XFX RX580 still 5 beeps, Gainward 3060Ti works. I switched back to old PSU with Gainward GPU and it works fine. It is really weird, I tried that GPU with that PSU before getting 5 beeps only. But ok, Windows installed, thank you for your help. I will keep you posted about the results. I need to chceck again that RX580 on other machine. |
|
|
|
|
Jelon
Newbie
Joined: 10 Nov 2021 Status: Offline Points: 75 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Nov 2021 at 6:45pm |
Are you still getting 3 beeps even after changing RAM? I know that it might sound stupid but check again if it is pressed really hard into the socket. When building first rig I did that basic mistake. What type of memory do you have? What CPU? Give us some details please. |
|
|
|
|
virgil
Newbie
Joined: 10 Nov 2021 Status: Offline Points: 30 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Nov 2021 at 7:20pm |
|
Well it's not my first rig but I have never used this mobo.So I used for cpu a Celeron G5920 and an I7 10700k, for ram I went for kingston hyperX 4&8g 2444 a corsair vengeance pro 8g 2666 and a Crusial 8g 2666. I have checked at least 10 times if the dimm is place good enough to the point where I think i might break the board if I keep on pushing harder.
|
|
|
|
|
chaib
Newbie
Joined: 11 Nov 2021 Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 Nov 2021 at 9:46am |
|
well, I finally got this solved after 3 hours of troubleshooting.. I could get 4 cards to work but when I added the 5th one the board will just beep for 5 times and nothing displays..
What I did was to remove all cards from the board... boot with onboard gfx into bios.. 1.update bios to 1.40 2.after that get into bios with on board gfx again.. 3.navigate to chipset settings, set the following: a.Primary Graphcis Adapter -- Onboard b.Above 4G Decoding -- Enabled c. C.A.M --- Disabled d. VT-d --- Disabled e. SR-IOV Support --- Enabled f. DMI Link Speed --- Gen3 g. PCI-E1 .... M_PORT_1 Speed --- All set to Gen2 h. F10 to save and reboot. when it posts you should see all PCI-E slots showing up green in the screen. I have a 1300W EVGA power supply so I didnt need to use a second PSU.. 2x molex to power the PCI-E slots CPU is Celeron G5905 5x3060 + 1x3060Ti Hope this helps |
|
|
|
|
Jelon
Newbie
Joined: 10 Nov 2021 Status: Offline Points: 75 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 Nov 2021 at 6:46pm |
|
I had some time yesterday to experiment so here is small update about my problematic 2 rigs (one with only 2 GPUs working and one with 5 beeps at the start).
First one working now just fine with six 3060Ti GPUs. What I did was getting back to 1.10 BIOS, reinstalled Intel ME driver and flashed 1.40 BIOS again. I think my mistake was updating BIOS first and than installing all drivers from CD. On other rig first what I did was run all drivers install from the CD, than updated BIOS and I had no problem with multiple GPUs. Maybe that is the right method. In second rig with 5 beeps at startup - it was caused by RX580 GPU with updated BIOS. GPU with standard BIOS boots fine, you can see everything on a screen from the first moments. After setting up BIOS for mining on the same card 5 beeps again and black screen. However after waiting a while (20-30 seconds) Windows startup screen showed up, everything works. Checked again and all RX580 GPUs are the same, tested on XFX and Biostar cards. Right now 4 GPUs are working, after adding more system recognizes them but slows down and crashes sometimes. Still it's not a problem with the MB itself but Windows and drivers. |
|
|
|
|
WAVE69
Newbie
Joined: 13 Nov 2021 Status: Offline Points: 65 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 Nov 2021 at 8:41pm |
|
First time using ASrock H510 Pro BTC.
Im using it with 6 x MSI GTX 1660 Ti 6GB and for cpu Intel G6400. When im booting from HiveOS all gpu's running (fans working) but when the miner starts only one gpu gains mh and also on hiveOS dashboard one gpu seems to work and the other are "missing units" Check bios for Above 4G decoding and the option was set on Enable. Everyone know how to fix this or maybe a guide to try something new? |
|
|
|
|
RigMiner
Newbie
Joined: 26 Nov 2021 Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 26 Nov 2021 at 8:46pm |
|
My rig shows all three 3060 TI GPUs, but only first card is mining. I have tried all combinations by putting GPUs in different order, but always only first GPU is mining. Especially my concern is if this CPU is compatible with this MB. Can someone help?
I have rig with following components: Motherboard H510 Pro BTC+ ASRock (P1.10 06/03/2021) CPU 4 ? Intel(R) Pentium(R) Gold G6605 CPU @ 4.30GHz AES Disk Model ATA KINGSTON SA400S3 120GB 3 X 3060 Ti MSI 8GB RTX 3060 Ti Zotac GAMING RTX 3060 TI MSI GeForce RTX 3060 Ti KINGSTON FURY 4GB 3200MHz DIMM DDR4 BEAST |
|
|
|
|
Post Reply
|
Page <1 910111213> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
Sasha37 wrote: